Product Chart

ManualsBrandsShenzhen Shengshi Ba Yin Electronic Technology ManualsElectronicsMIDI electronic wind instruments

Product Appearance Description

Note Key1~9

During the performance (left hand on top and right

hand on bottom), fingers touch each key separately,

and the desired note can be achieved by touching the

key according to the fingering (refer to the fingering

chart).

Note Key 2 (Semicircle key)

This note key 2 (semicircle key) is a flat key at any

time except when the note key 1 and the note key 3

are pressed at the same time. Users can turn it off in

the settings menu if they are not used to it.

Chord Keys

The EWI-S2 has a major third and major fifth chord

function. When the user touches this key during the

performance, the desired major third or major fifth

chord will be played.

Up/Down Semitone Keys

Pressing this key during performance will raise/lower

a semitone.

Vibrato Key

When playing, touch this key to produce a vibrato

effect. The depth and rate of the vibrato can be set

according to your own requirements in the settings.

Switch Key +/-

The +/- two keys are the sounds selection keys, each

short press will increase or decrease to change a

sound, and long press will quickly increase or

decrease. In the MIDI output mode, it is used as a

MIDI channel switch, and when using the user sound

bank, it is used as a quick switch sound key.

Summary of content (4 pages)

PAGE 1
Product Appearance Description Note Key1~9 During the performance (left hand on top and right hand on bottom), fingers touch each key separately, and the desired note can be achieved by touching the key according to the fingering (refer to the fingering chart). Note Key 2 (Semicircle key) This note key 2 (semicircle key) is a flat key at any time except when the note key 1 and the note key 3 are pressed at the same time. Users can turn it off in the settings menu if they are not used to it.
PAGE 2
Encoder This encoder is a multi-function setting knob button. Rotate this knob alone in the playing state to switch timbres, hold down the octave center 0 button and rotate this knob to transpose. In the playing state, press and hold for three seconds to enter the setting interface of various parameters. Rotate this knob to select setting items. Press and hold the octave center button and click this button to return to the previous step. Octave Keys The EWI-S2 is designed with a total of seven octaves.
PAGE 3
Nozzle The nozzle of EWI-S2 can be unplugged from the blowpipe as a whole for easy cleaning and replacement. OLED Display Displays current performance status information and details of encoding settings. Strap Hole The EWI-S2 is equipped with a neck strap, which is convenient for standing and mobile playing. Thumb Rest The thumb rest is ergonomically designed for easy grip and balance. Sounds Bank Upgrade Interface This instrument supports sounds upgrades.
PAGE 4
Audio Output Jack This jack is a standard 6.35mm stereo audio output jack. Use a 6.35mm stereo plug cable to connect audio equipment while you play. MIDI DIN Output This jack is a standard MIDI 5-pin output jack, you can use this jack to connect other MIDI devices with a MIDI 5-pin cable to perform. USB MIDI/Charging Jack You can charge the instrument through this jack,also as a firmware upgrade and USB-MIDI output. technician for help.