User's Manual

Mute
BT/Pair
User Manual
:Indicates that the content of the hazardous substance in all homogeneous
materials of the part is below the limit requirement specified in accordance
with the GB/T 26572.
X:Indicates that the content of the hazardous substance in all homogeneous
materials of the part is exceeding the limit requirement specified in accordance
with the GB/I 26572. There is no mature alternative solution that meets the
requirements of RoHS.
The numbers in this mark indicate that the environmental protection use
period of the product under normal use is 10 years. Some components may
also have an environmental protection use period indication, and the
environmental protection use period is subject to the figures in the indication.
Due to different product models, the product may not include all the above
parts except the host, please refer to the product packaging.
This form was prepared in accordance with the provisions of SJ/T 11364.
1.Packing List 3. Function Description
2. Parameter
1.Ports
2. Display Screen
Sound effect
Volume
Audio source
3.Operation (Touch Screen)
4.Remote Control
(L)900*(D)98*(H)60mm
Full-Range Driver: 45*66mm*4
30W
60Hz-18KHz
45dB
78dB
ARC, AUX, OPT, USB, SUB OUT
AC 100V-240V 50/60Hz
3.3Kg
Dimensions
Speakers
Power
Frequency
Separation
S/N Ratio
Interface
Input Voltage
Gross weight
1 2 3
1
1
2
2
3
3
5
4
Sound Effect
Volume
ON/OFF: Touch the icon for 3s to turn on/off.
Input selection
PAIR
MOV
NEWS
MUS
Input selection: Touch the button and the "BT/AUX/OPT/ARC/
USB" icons will light up if the corresponding audio source is
connected.
ON/OFF
ON/OFF
1
2
2
1
3
BT/Pair
Short press this button to select
BT mode, long press to remove
the previously paired device and
enter pairing mode.
Audio Source Selection
Press the button, the icon (BT,
AUX, OPT, ARC, USB) will light
up if the corresponding audio
source is connected.
Sound Effect
MUS: music mode
NEWS: news mode
MOV: movie mode
2
2
3
1
4. Wall Mount
Installation Steps
5. Wired Connection
Plug into the power supply, the display screen will show "-" which means
the soundbar is standby mode (do not turn on until audio connection
completed).
There are four ways to connect the soundbar and the audio source: AUX,
OPT, USB, ARC. Select one according to the device you are
trying to connect, the corresponding icon will light up once this audio
source enter successful.
Notes:
1. The default audio output mode of most TVs is self-contained speaker,
so after connect this soundbar with your TV by OPT, ARC, please
set the TV audio output mode manually according to the audio cable
connect with the soundbar.
2. If you choose ARC connection, please make sure your TV or
devices support the HDMI ARC feature.
TV's HDMI ARC is disabled by default, so please set TV for ARC mode.
HDMI ARC port and mode on TV may be differently, please check the
TV user manual for details.
If your TV doesn't support HDMI ARC, you can use the included optical
audio cable to connect to the optical port on your TV.
3. The HDMI cable is not included in the package. If you choose ARC
connection, you need to buy an HDMI cable yourself.
6.Wireless Connection
7. Automatic Standby
1. Turn on the device, touch the icon on the control panel or press the
button on the remote control, the "BT" icon will flash slowly on the
screen indicating the soundbar has entered paring mode.
2. Search for "Coocaa Live-1" on your bluetooth device and then
pair to the soundbar. The BT icon will illuminate, and the soundbar
will make an audible beep to indicate the connection is complete.
Notes:
1. If your device asks for a password during the pairing process, please
use "0000"
2. If you can't find or pair to this bluetooth, turn off the soundbar, then
5s later turn it on and try to connect by following the instructions
above.
3. The soundbar can only pair to one device at a time, if you can't pair
your device , please check that no other device is already paired with
the soundbar. A previously paired device will automatically reconnect.
4. Bluetooth connection range is 5-8m, but it will be shorter by some
causes-radio interference such as WIFI routers, induction cookers and
smart air cleaners; too much bluetooth your device paired and
reserved .
8.After-sales Services and Warranty
9.The Toxic and Hazardous Substances or Elements 10.FCC Caution
1. 30-Day Return of Any Reason. You may return your undamaged
product and packaging within 30 days, please return the unit in its
original carton.
12-Month Warranty for Quality-Related Issues. If it is not quality related,
the customer must pay the return shipping costs and
repair costs.
2. When after-sales service is needed, please fill in the relevant
information according to this form.
3. If you have any questions or comments, please contact us at
[e-mail]. We will reply to you within 12 hours.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
To save power and extend the working time of the speaker, it will
automatically switch to Standby mode if there is no input signal for over
15 minutes., and will turn back on when an input signal is detected.
① ② ③
Important:
According to research, most customers prefer to place speakers on cabinet in
order to keep the wall clean. The height of this speaker is only 60mm,
which is very suitable for placing in front of the TV, so there is no
mount kit in the package. Please contact us if you need mount kits.
产品型号 酷开 Live-1-7说明书
产品料号 C070303059
印刷信息 单黑\128g铜版纸\过亚油\风琴折页
Name
Address
Date of
Purchase
Order ID
Fault
description
Email
coocaa Live-1
Sub output: We reserve this upgrade interface, the users can
connect it to your subwoofer and create a bass system.
Sound effect: You can select from 3 sound modes, the icon will light
up once enter the corresponding mode.
MUS: music mode
NEWS: news mode
MOV: movie mode
Volume: The volume level can be set between 1 and 30, 18~20 is
advisable.
Shows audio input temporarily: Select the audio source through
touch screen or remote control, the screen will show audio input
for 3s, and then back to volume.
Audio input: Select the audio source to input through touch screen
or remote control, the corresponding icon will light up once this
audio source enter successful.
ARC: ARC input (your device must support HDMI ARC output)
BT: Bluetooth input
AUX: Stereo aux input
OPT: Digital optical input
USB: USB input, the playback time will display on volume area
ARC: Using the HDMI cable, connect the ARC connector on
the sound bar to the HDMI ARC connector on the TV.
USB: Automatically identifies and plays tracks from a storage device.
AUX: Connect to the RCA jack of the source device using a 3.5 to
RCA cable.
OPT: Connect to the OPT OUT jack of the source device using a
optical cable.
Power: Connect to 100~240V power supply.
SUB Out ARC USB AUX OPT
DC IN
15V 2A
USB
Audio Source
Selection
1
SoundBar
Digital optical cable
Stereo RCA to
3.5mm audio cable Power adapter User manual Remote control
Place it on the cabinet
Mount it on the wall
(mount kit needed)
Toxic or harmful substances or elements
Part Name
Lead Mercury Cadmium
Hexavalent
Chromium
Polybrominated
biphenyls
PCB part
Plastic part
Metal part
Speaker
Power adapter
Only for use in non-tropical climates.
Only suitable for areas below altitude of 2 000 m.
The speaker reaches full acoustic performance after it has
played music for about 7 days at 2/3 volume
Polybrominated
Diphenyl Ether