User's Manual

ManualsBrandsShenzhen Shadow Crown Technology ManualsElectronicsLED Projector

封面封底

70mm

120mm

2 3

User Manual

Due to continuous improvement, actual product may

different from the manual, manual is for reference only.

Safety notice

1.1. Please read Manual carefully before you use the

projector.

1.2. To ensure stable power supply, please use national

standard power cable and power cord with grounding.

1.3. Please use the same power voltage as the projector

marked.

1.4. Please do not open the projector, otherwise the supplier

will not afford warranty service.

1.5. Do not look directly at the projector lens while the

machine is working to avoid damage your eyes.

1.6. To avoid clog of the projector vent, please do not cover

with cloth, carpet and other materials.

1.7. This projector does not have waterproof function, please

keep it away from rain,moisture and other items

containing liquid such as vase, cup, etc.

1.8. To avoid electric please keep the projector away from

rain or water or moisture.

1.9. And cut off the power supply if do not use this project

for a long time.

1.10. Use the originally foam or other unit-shock material to

protect projector, if you need transport this projector.

1.11. If you find the projector have problems, please contact

with the supplier, do not repair by yourself.

1.12 Toextendtheprojectorlifespanandprotectyour

eyesight,wesuggestyoumayhaveabreakafter3-4

hoursusing.

Maintain Indication:

1-year warranty from factory, for more warranty information,

please contact with supplier (warranty service is not including

the frame, manual, package, and some subjective idea about

the video, sound, image aspects).

Interface introduction Remote control introduction

*NOTE:

1. To avoid power shortage, please do not mix use the

old and new battery at the same time.

2. To avoid battery leakage corrosion, if do not use remote

control for a long time, please take the battery out.

3. When using the remote control, please align the remote

control signal transmitter to the projector’ s infrared

signal reception position.

Built-in battery power supply

(Available for models with

built-in battery only)

Switch of battery's power

Fiddle with the button to “on”, then projector will be

charged by built-in battery. In this situation, projection

brightness will be a little lower.

Battery symbol will appear on projection screen to

indicate the remained power volume.

*It takes about 3 hours for charging.

Manual focus

Down

Return

Mute

Play/Pause

Menu/

shortcut

Vol＋

Power

Signal Source

Right

Left

Vol-

Media connection

4.1. Media input slot connection

Connect the USB/Micro SD drive with the content to the

projector USB/Micro SD port, select “Media”, you can

select movies, music, photo, text on the list.

MultiMedia Input Source Setting

Movie photo

Music Text

Audio support

Photo support

Text support

Video support

MP3/WMA/OGG/AAC/FLAC/APE/WAV

JPEG/BMP/PNG

3GP/AVI/MKV/FLV(FLV)/MOV/MP4/MPG/

VOB/MPG/RMVB/RM

TXT

Multi-

media

4.2. HDMI equipment connection

HDMI slot could connect to computer and all the device

with HDMI slot. As connected, choose the option HDMI.

4.3 AV video equipment connection

Use 3 in 1 cable video convert cable, connect projector

AV slot, the connection method like the picture, as

connected, choose the signal source video.

Support format：NTSC / PAL

4.4 3.5mm audio device connection

Could connect 3.5mm earphone and speaker equipment.

Projector connection introduction

6.1 Connection introduction

*Could connect multi-device and applications.

Setup menu

6.1 Picture setting

Open the home page--”Setting”,find the picture setting,

you can set up the projection mode, image scaling,

aspect ratio，picture mode of the projector.

MultiMedia Input Source Setting

Picture Setting

Projection... Image scaling Aspect Ratio Picture Mode

System Setting

OSD Language Software Up... Factory Reset... Auto Sleep

6.2 System setting

Open the home page--”Setting”,find the system setting,

you can set up the OSD language,software update,

factory restore,auto sleep of the projector.

MultiMedia Input Source Setting

Picture Setting

Projection... Image scaling Aspect Ratio Picture Mode

System Setting

OSD Language Software Up... Factory Reset... Auto Sleep

Image focus

Put the projector vertical to the projector screen or

white wall, adjust the keystone，until the image clearly

enough,then the focus is finished.During the focusing,you

could display video the menu while adjust the focus.

Power supply

TFT LCD

640*360

1920*1080

LED

Manual operation

1.5--5M

1.62:1

16:9

Adapter:12V-2.5A

Adapter:12V-3A

Lithium battery:7.4V/1600mAh

HDMI/USB/Micro SD/AV/Micro USB

Earphone

0.5kg

117.8*133.4*94.9mm

Standard

Input

Output

Net weight

Unit size

Built in

battery

Imaging technology

Resolution

Hightest resolution

Light

Operation mode

Projection distance

Projection ratio

Aspect ratio

Technology Features

11.1 Basic parameters

This switch is only available for the battery

built-in version.

1、HDMI input slot

2、USB input slot

3、IR receiver

4、DC Power input

5、AV input slot

6、Earphone slot

7、Micro USB(5V/2A)

8、Switch of battery's power

9、Micro SD card slot

Manual focus

Lens

Left Down Right OK Power

switch

Return

①

②

③

④

⑤

⑥

① ② ③ ④

⑤ ⑥

⑦

⑧

⑨

① ②

③ ④ ⑤

⑥

MultiMedia Input Source Setting

MultiScreen

HDMI

MultiMedia Input Source Setting

MultiScreen

HDMI

MultiMedia Input Source Setting

MultiScreen

HDMI

Miracast connection

Cast SSID:NETLINK-E179

Password:12345678

WIFI Config：

Step1：Phone connect to NETLINK-E179

Step2：Scan the QR code

You can press the“OK”button for 3 seconds

to enter the WIFI setting interface

or Browser：http://192.168.203.1

Step3：Setting Cast and easy sharing！

Android Phone-Miracast Guide

Windows10 PC-Miracast Guide

1.Enable miracast feature in Phone

2.Searching Cast SSID and connect

1.Enable Projector feature

2.Connect to wireless display

3.Searching Cast SSID and connect

IOS-AirPlay Guide

1.IPhone/MacBookconnect to WIFI

router SSID

2.“Enable AirPlay

3.Searching Cast SSID and connect

TV Cast（DLNA）-Guide

1.Phone Connect the WIFI router SSID

2.Open APP which supported TV cast

3.Enable TV cast，searching Cast SSID

4.Connected and enjoy the vide

Non-LAN Cast

Mode:Miracast/AirMirror

QR code

Select the "miracast" in the channel interface and connect

the phone to the Cast SSID：NETLNNK-E179：Scan the

QR code to access the home page of the miracast, or

press "OK" on the remote control for three seconds to

enter the WIFI setting interface. Also available:

http://192.168.203.1, Set up the network and start using it.

After connecting to the WIFI router, the miracast will

automatically switch to the miracast mode.

5.1 Android mirroring

Connect the phone to the Cast SSID:NETLINNK-E179，

Enter-into the mirroring function of the mobile phone,

search the mirroring device, directly connect to Cast SSID,

and the mirroring is successful.

* Please ensure that the phone and projector are on the

same network (the projector displays the Cast SSID in

different names here, subject to the actual display).

5.2 IOS miracast

Enter into the control center on the IOS device，click

“miracast”， Select the corresponding miracast SSID, click

the SSID and connect. After successful connection, the

screen is projected onto the same screen and the

connection status is displayed on the phone.

* Please make sure that the iOS device and the projector

are on the same network, or connect the projector to the

wifi interface of the iOS device to Cast SSID: Netlinnk-E179

(the Cast SSID of the projector is different here, depending

on the actual display).

5.3 Windows10 mirroring

Computer WIFI connect to Cast SSID：NETLINNK-E179，

Find "Projection" in the computer function list and click

"Connect to wireless monitor", search for Cast SSID of

this screen and click "Connect".

* Please ensure that the computer and projector are on

the same network (the projector displays the Cast SSID in

different names here, depending on the actual display).

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

Changes or modifications not expressly approved

by the party responsible for compliance could void

the user's authority to operate the equipment.

RF exposure warning:

This equipment must be installed and operated

in accordance with provided instructions and

the antenna(s) used for this transmitter must

be installed to provide a separation distance

of at least 20 cm from all persons and must

not be co-located or operating in conjunction

with any other antenna or transmitter.

End-users and installers must be provide

with antenna installation instructions and

transmitter operating conditions for satisfying

RFexposure compliance.

FCC Warning: