Face Recognition Management System Instructions Face Recognition Management System
Face Recognition Management System Instructions Preparation: Install the face recognition system. Computer configuration: Intel I3 or higher processor, 4 GB memory, and 500 GB or higher hard disks Resolution: 1920*1080 or higher OS: Windows XP SP3, Windows 7, and Windows 10 flagship versions Operating environment: Framework 4.
Face Recognition Management System Instructions 2.Log in to the system 2.1 Double-click on the desktop or choose Start>All Programs>Face Recognition Management System, and click the application icon in the Face Recognition Management System folder to log in to the system, as shown in the following figure. 2.2 Enter the account name and password, and click Login.
Face Recognition Management System Instructions Password: 123456 If you select Retain account, the system remembers the login account and you do not need to enter the account name for subsequence logins. 3.Add a device 3.1 Adding the equipment Automatic search Choose Equipment Management>New>Find. The found face recognition terminals are displayed in a list. Modify the equipment IP address and gateway, and click Confirm to add.
Face Recognition Management System Instructions 4.Record the face Imaging varies with USB cameras. Logitech C270i or C920 cameras are recommended. When recording a face, take a photo or select a local photo. For details about thephoto taking requirements, see the sample photos. After a face is recorded, select the white list and the target equipment, and click Update whitelist.
Face Recognition Management System Instructions
Alexa-Enabled Thermometer and Hygrometer Model No. TP-90 Quick Start Congratulations on your purchase of asmart, wirelessAlexa-enabledindoorThermometer/Hygrometer. This Alexa-enabled Thermo Prodevice not only quickly and accurately broadcasts the temperature and humidity of each room, it allows you to be able to conveniently look up historic temperature and humidity readings from any location via an APP installed on your cellphone.
Buttons: Power: Press to turn on/offdevice. DIM: Press to adjust the brightness of the LED display. F/C: Press to switch the temperature unit between Fahrenheit and Celsius. RESET: Press and hold for 5 seconds to enter EZ or AP pairing modes. Followthe simple steps below to set up your smart Alexa-EnabledThermometer/Hygrometer. You need to install and setup both the Thermo Pro Home APP and Amazon Alexa APP. Step 1.
please go back to the Thermo Pro Skill, press SETTINGS and then press Link Account and enter your Thermo Pro Home APP account ID/password. Done! Test with the following command “Alexa, ask Thermo Pro, what’s the temperature in the (device’s name)?” The below is a list of Voice Commands you can ask Alexa: If you have any questions or need more help with setup, please feel free to contact us: CUSTOMER SERVICE Email: service@buythermopro.com Telephone: US/Canada: 1 877 515 7797 Mon-Fri 8:00 AM – 8:00 PM (EST).
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.