BABY MONITOR User Manual This Instruction for use provides cautions and warning along with device setup and use. Please read the entire manual to learn about the features of the device use.
Product Info Components: Monitor Device, Base Station (Screen), Charging Cable, Battery Battery Removal Tool, User Manual The monitor device will track your baby's sleeping position in real time, display your baby's current sleeping position on the screen, and notify you after the baby has been lying prone for 45 seconds. It monitors the ambient temperature, as well as abdominal movement, and transmits data to the base station every 5 seconds. The base station will notify based on the data received.
Who Should Use • Children 0-4 years old after the umbilical cord falls off • Babies who cannot roll over on their own • Parents who need to temporarily leave the crib • Do not use the device if it is in a cradle, external movement will affect the monitoring of the device How To Use Please set the time and value before use. Clip the product onto snugly fitting sleepwear (diaper/pants/etc), right next to the belly button. (Snug fit sleepwear is important to avoid false alarms.) 1.
Control Panel Description Unit Description Purpose Rotary knob Turn to adjust a selected option. Confirm Confirm the option and jump to the next option. Home button Back Press to return to the Home screen. Return to the previous option. Screen Icon Description Press the home button on the home screen to access menu options.
About Settings About sounds On the home screen, adjust the rotary knob to adujst the sound volume. Pause notification sounds When there is any notification, you can pause the notification sound for 60 seconds by pressing the home button twice. If the condition is not resolved within 60 seconds, the notification remains in effect until the condition is resolved. Switch settings Rotate the knob to select the corresponding function switch, and press the Confirm button to switch ON/OFF.
Using Notice 1. 1、This product is only intended to monitor your baby's sleep dynamics and is not intended to replace you as a caregiver. 2. Before using the product, ensure that the product is in normal working condition and operating environment. If stable readings do not appear during testing, discontinue use immediately. 3. When using the product, please keep away from devices that generate strong electric and magnetic fields. Use in an inappropriate environment can affect the working of the product. 4.
Troubleshooting The following are possible problems. Please troubleshoot them according to the following table. If there are other problems that cannot be solved, please do not use this product.
Always light up the red notice Possible Reason The threshold is too high or too low Solution Make sure that the temperature and respiration rate are within the normal range The monitor device cannot be turned on Possible Reason Solution No battery installed Install a battery The monitor device battery is too low Please replace the battery of the device The battery is not installed correctly Verify the front and back of the battery.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.