Icon Information The following icons are available through this manual: Caution: indicates situations that could cause damage to your terminal. Note: indicates tips that can help you make better use of your terminal. Term Explanation Key Operation Short press: to press a key and release it quickly. Long press: to press and hold down a key for above 1.5 seconds. Hold down: to press a key and remain holding it down.
To operate in TMO mode, the terminal must be granted authorization by your service provider, and must be within the network coverage. 2 / 25 Samhoo SCI&TECH CO.,LTD.
Contents Checking Items in the Package.................................................................................................... 4 Product Overview ........................................................................................................................... 5 Terminal Controls.................................................................................................................... 5 Function Keypad ...........................................................................
Checking Items in the Package Please unpack carefully and check that all items listed below are received. If any item is missing or damaged, please contact your dealer. Battery Antenna Charger Belt Clip Power Adapter Strap Radio Unit Note: Frequency band is marked on the label of antenna; if not, please refer to the label on the terminal for frequency band information 4 / 25 Samhoo SCI&TECH CO.,LTD.
Product Overview Terminal Controls No. Part Name No. Part Name 1 ○ P1 (programmable) 2 ○ PTT Key 3 ○ P2 (programmable) 4 ○ Emergency Key 5 ○ Antenna 6 ○ LED Indicator 7 ○ Channel Knob 8 ○ Volume Knob 9 ○ Receiver 10 ○ Directional microphone 12 ○ Function Keypad 11 ○ Transflective TFT Color Display 5 / 25 Samhoo SCI&TECH CO.,LTD.
13 ○ Speaker 14 ○ Numeric Keypad 15 ○ Omnidirectional Microphone 16 ○ Battery Latch 17 ○ Accessory Jack Cover 18 ○ Strap Hole 19 ○ Belt Clip 20 ○ Battery 21 ○ Charging Piece 22 ○ Accessory Jack Function Keypad Programmable Keys Most of the terminal’s keys including P1, P2, four Navigation Keys, Call Key, numeric keys 1-9, and , can be set as shortcuts to terminal functions or menus. Then you may quickly access menus or features through press of a key. 6 / 25 Samhoo SCI&TECH CO.,LTD.
Before Use Charging the Battery Only use the charger and battery specified by Samhoo. The charge LED will indicate the charging progress. 。 Procedures 1. Connect the power adapter to an AC source socket and the rear jack of the charger; 2. Place the terminal with the battery attached, or the battery alone, into the charger, Make sure the battery’s charging pieces are in good contact with the charger’s terminals; 3. The charging process begins when the charger LED solidly glows red. 4.
Assembly and Disassembly Attaching the Antenna 1. Turn the antenna clockwise to fasten it. 2. To remove the antenna, rotate it counter-clockwise. Attaching the Battery 1. Fit the extensions at the top of the battery into the slot at the top of the terminal’s body. 2. Slightly press the bottom of the battery until a click is heard, Note: If the battery is loose or unsecured, please remove and attach it again. To remove the battery, turn off the terminal first.
Status Indicators LCD Icons The LCD of your terminal displays the terminal status, text entries, and menu items. The following are the icons that appear on the terminal’s display.
Telephone Call LED solidly glows red on both parties. Low battery LED flashes red slowly. Channel free LED flashes green slowly. Channel busy LED solidly glows orange. Basic Operations Turning the Terminal On/Off To turn the terminal on，Please clockwise [power switch / volume control knob] until you hear a "click" sound; To turn the terminal off, Please this anti clockwise rotating knob until you hear a "click" sound.
Switching Operation Mode You may switch the terminal between TMO and DMO through any of the following methods: 1. Menu selection Press the Options key to access the menu, and then select TMO or DMO. 2. Channel Knob Each channel radio can be configured as analog channel by the dealer or digital channel. If the region contains digital channel and analog channel, you can use channel selection knob switch to analog channel and digital channel. Call Individual Call Transmitting an Individual Call 1.
Receiving and Responding to a Group Call When a group call is received, you need not make any operation. When the calling party stops talking, you can hold down the PTT and speak into the microphone to call back。 Emergency Call Both DMO and TMO support emergency call, and operations are the same in both modes. Long press the top Emergency key to transmit an emergency call. To terminate the call press . 12 / 25 Samhoo SCI&TECH CO.,LTD.
Menu Navigation Function PhoneBook This menu is used to store your contact information. It can contain up to 500 entries. Each entry consists of contact name and contact number. To access this menu, press “Func -> PhoneBook” in idle mode, and then you can perform these operations: ■Create new contact ■View a contact ■Modify a contact 13 / 25 Samhoo SCI&TECH CO.,LTD.
■Delete a contact ■Delete all contacts ■View phonebook memory ■Search a contact (by name) ■Call a contact With this menu, you can make a duplex (for TMO only) or simplex call to a contact. The method is as follows: 1. Select a contact from the menu; Press and hold down PTT key to make a simplex call, Message ■Create Message （1）Status Message Status Message is predefined by your dealer. You can choose to read and send them, but no editing is available.
Extract No.: to extract the number; Call: to call the message sender. ■Outbox All sent messages are saved here. It can contain up to 20 entries. The operations available for any message in outbox are: Delete, Delete All, Individual, Group, Extract No., and Call. ■Drafts You can save up to 10 drafted messages here. For any message, you can choose to delete, edit or send it. Call Log This terminal can save up to 20 entries in the option Dialed Calls, Received Calls and Missed Calls respectively.
Settings ■Date&Time This option allows you to set the current date, time and time format. Press Left or Right key to select the item to be set, and then input the right value through keypad. ■KEYPAD Lock This option allows you to enable or disable the Auto Keypad Lock feature. If it is enabled, the keypad will be locked automatically after the programmed time (10 seconds by default) elapses ■DispSaver This option allows you to enable or disable Display Save feature.
■Man Down When this feature is enabled, the radio will send an emergency alarm to the predefined ID automatically once it falls over or tilts by 45°. At the same time, it would sound sharp alarm tone. With this feature, you can enjoy enhanced personal protection. ■Security PIN Code To set PIN code On or Off, you will be required to input the PIN code. The radio will be locked when wrong PIN code is entered up to the predefined times. To unlock it, you need to enter the right PUK code.
GPS Function The basic position information display Basic information includes the date, time, longitude, latitude, altitude, number of satellites. The date and time display value associated with the terminal sets the time zone. Time correction This function using the effective GPS received correction of PT580 terminal time. This function can be combined with time zone option.
Options In the home screen, press Options to access this menu. Here we are going to introduce all menu items based on TMO mode. Operation Mode Choose this option in the "TMO", "DMO", " Conventional " mode switching between. Talk Group In the "options" menu, select "group management" into the group folder list, the list of files for each group can perform the following operations: Channel/Group Add Channel/Group Delete Channel/Group View Scan 19 / 25 Samhoo SCI&TECH CO.
To enter the menu, press [options] button to enter the main menu and select "scan". Scan on/off Scanning function can help you to listen to the communication activities of other channels, to understand the current status of related group activities. You can use this option to open or close the scanning. Scan list You can create a scan list by the dealer for each channel, each scan list contains at most 32 channel, can contain both digital channel also contains the analog channel.
3. Check whether your terminal is in TMO mode. 1. Please check the signal strength and see whether your terminal is within the network coverage. Unable to make a call 2. Check whether the called party is within the network coverage. 1、 Check whether your terminal is a member of the Unable to call or receive from a specific group. target group. 2、 Check whether your terminal is authorized to access the target group. Unable to make a call in DMO 1. The called party is out of coverage. mode 2.
Care and Cleaning To guarantee optimal performance as well as a long service life of your terminal, please follow the tips below. Terminal Care Keep the terminal far away from substances that can corrode the electronic circuit; Do not hold the terminal by its antenna or earpiece cable directly; Attach the accessory jack cover when accessory is not connected. Terminal Cleaning Clean up the dust and fine particles on the terminal parts with a clean and dry lint-free cloth or a brush regularly.
1. The Scope And Duration Of The Warranty Host 18 months Accessory (including antenna, battery, charger and a belt clip etc.) 6 months 2. The warranty application If the application Samhoo product warranty service, you must provide a valid Samhoo product warranty card or valid purchase invoice originals as evidence; the warranty period, related markers Samhoo products, including the serial number label, should be clear and complete and shall not break.
7) The date of purchase cannot be identified product; 8) No failure or damage caused by the force majeure; 9) Normal and normal wear; 10) The following case battery: a． Battery shell sealing any man-made damage or unsealed phenomenon; b． In the product beyond the provisions of equipment or maintenance conditions, fault or damage caused by charging or use. Special instructions.： 1.
symbol will appear on top right corner of the screen; Simplified Chinese Pinyin 1. Press the number keys are input Pinyin letters, L C D display alternative Chinese characters and the corresponding alternative spelling; 2. According to up / down keys to select the required phonetic alphabet; 3. Press the button to confirm the highlight Chinese Chinese characters, then press the [up] / [down] button to select the desired Chinese characters; 4.
RF Radiation Information RF Radiation Profile Radio Frequency (RF) is a frequency of electromagnetic radiation in the range at which radio signals are transmitted. RF technology is widely used in communication, medicine, food processing and other fields. It may generate radiation during use.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RF Exposure Compliance and Control Guidelines and Operating Instructions To control your exposure and ensure compliance with the occupational/controlled environment exposure limits always adhere to the following procedures. Guidelines: • Do not remove the RF Exposure Label from the device. • User awareness instructions should accompany device when transferred to other users. • Do not use this device if the operational requirements described herein are not met.
