SHENZHEN SAMHOO SCI & TECH CO.,LTD.
Preface Thanks for your favor in our product. To derive optimum performance from the product,please read this manual carefully before using it. This manual applies to the following models of D618 series: D618U1、D618U2、D618V digital portable products.
User Information Instructional Icon ◆ Government law prohibits governmental jurisdiction within The following icons are available through this manual: the scope of unauthorized use of radio. Caution: Indicates situations that could cause damage to your radio. ◆ Illegal operation will be subject to fines or arrest punishment. ◆ Repair only by trained professional and technical personnel. Security: Users need to know and understand the use of radio.
Copyright Information Disclaimer Samhoo is trademark or registered trademark of SHENZHEN SAMHOO Samhoo endeavors to achieve the accurancy and completeness of this SCI & TECH CO.,LTD. in the PRC and/or other countries or areas. manual, but no warranty of accuracy or reliabilityis given. All the Samhoo retains the ownership of its trademarks and product names.
Content Checking Items in the package.............................................................2 Adjusting the volume........................................................8 Optional accessories ................................................................................3 Selecting a channel...........................................................8 Product overview.......................................................................................4 Signal Intensity * ......................
Checking Items In The Package Please unpack carefully and check that all items listed below are received. if any item is missing or damaged, please contact your dealer. Battery(B02207400) Antenna(AntD618H1) Radio unit Charger(DC100002 ) Power adapter(CG-120100 ) Belt clip(SBC01) Strap(SR000) Ower's manual Certificate Note: 1.The frequency band of antenna is marked on the label of it, if not, please refer to the label on the radio unit for frequency band information; 2.
Optional Accessories C-Earset with on-mic PTT (EA0303) Programming cable (SPC03) Note: If you need to know more information about the optional accessories,please contact us.
Product Overview Product controls NO. 4 Part Name NO.
Before Use Charging the battery Charging operation steps Charger LED indicator and charging status Please only use the charger and battery specified by Samhoo; the indicator of the charger can show the charging progress. 1.As shown, connect the power adapter to AC power socket and the jack at the back of the charger. 2.As shown, insert the battery or the radio with battery into the charger, and make sure the contact between the battery and charger is good. 3.
Assembly and Disassembly Attaching the antenna Removing the battery 1.Rotate the antenna clockwise until it is fastened. Note: To remove the antenna, please rotate it 1.As shown, hold the radio like this. 2.As shown, push up the battery latch with another hand. 3.Yank the battery as arrow direction shows in . counter-clockwise.。 Attaching the battery Attaching the belt clip 1.
Assembly and Disassembly Status Indicators Attaching audio accessory/programming cable LED indicators The LED indicator on top provides you with the information of the current operation status of the radio. 1.As shown in the picture, open the dust plug. 2.Align the audio/programming cable plug with the accessory jack. 3.Insert the audio/programming cable plug.
Status Indication Basic Operations LED icons Turning on/off the radio Dot matrix display could show multiple kinds of information. During knob it could show volume scale; rotate [Channel] knob you could In order to turn on the radio, please rotate the [On-Off/ Volume] knob clockwise until a clickety-clack sound is heard; during the process, the dot matrix screen will show the Starting animation start animation.
Basic Operations Signal Intensity * LED screen can indicate 5 levels of signal intensity and unregistered status. Clock * Display: Clock display includes “year; month/date; hour/minute”. Short press 【P1】key or 【P2】key continuously can display clock information in a circle. Year Month/Day Hour/Minute Signal Intensity Setup Press 【P1】key or【P2】key can switch to signal intensity interface to check signal levels.
Basic Operations Squelch Level * Mode Switch LED screen can indicate 5 squelch levels. Press 【P1】key or The radio support analogue conventional/digital conventional modes. Modes can be switched via programming software by dealers. 【P2】key continuously can switch to squelch level interface to check signal intensities. Note: Stands for limited functionality, indicating that this feature. Squelch Level Battery Levels LED screen can indicate 5 battery levels.
Troubleshooting Call Group call Talk group can be set by dealer in advance. The operation methods are the same under DMO/conventional mode. • Transmitting a group call 1: Rotate channel knob to select call group; Phenomena Analysis The radio cannot be turned on Please check whether the voltage is too low or the battery is damaged.
Care and Cleaning Quality Assurance and Maintenance Terms To guarantee optimal performance as well as a long service life of your radio, please follow the tips below. SHENZHEN SAMHOO SCI & TECH CO.,LTD. (hereinafter referred to as Samhoo) promise the radios produced by Samhoo, sincethe date of purchase, under the condition of normal use, operation and maintenance, have defects in the material or manufacturing technology, you will enjoy the following warranty service.
Quality Assurance and Maintenance Terms Note: 5.The fault or damage to the antenna is not caused by the materials or processing. 6.The related marks on the radio are torn up or erased, the serial number can not be identified. 7.The products whose purchase date cannot be identified. 8.The malfunction or damage caused by the force majeure. 9.The normal abrasion. 10.The battery with following circumstance: a.Artificially damaged or opened. b.Use the abnormal equipment to make a battery charging.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use Notice: this radio is intended for use in occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet the occupational limits in FCC and International standards. This radio device is NOT authorized for general population consumer use.
Operational Instructions and Training Guidelines To ensure optimal performance and compliance with the occupational/controlled environment RF energy exposure limits in the above standards and guidelines, users should transmit no more than 50% of the time and always adhere to the following procedures; ● In front of the face, hold the radio in a vertical position with microphone (and other parts of the radio including the antenna) at least one inch (2.5 centimeters) away from the nose or lips.
SHENZHEN SAMHOO SCI & TECH CO.,LTD. is registered trademark of SHENZHEN SAMHOO SCI & TECH CO.,LTD. and is under authorized use. © Copyright 2013 SHENZHEN SAMHOO SCI & TECH CO.,LTD. All rights reserved. SHENZHEN SAMHOO SCI & TECH CO.,LTD. Stock code: 834963 Address: Huaqiangyun Industrial Park, No.1-1 Meixiu Road , Meilin Industrial Park, Futian Distric, Shenzhen, China. Service hotline: 0086-755 8316 0260 Postcode: 518049 Website: www.samhoo-pmr.