USER GUIDE WIFI Remote Controller RSX-351
Thank you for choosing us! Very happy to serve you! Package Contents 1 x WIFI Remote Controller 1 x Charging Cable 1 x Wrist Strap 1 x Attachment key The necessary steps for the camera and remote control to connect successfully ■First set the camera to paired mode.
A.
B. How to Pair Your Remote and Gopro Find your camera model number B-1:For GoPro HERO3/HERO3+Camera set up 1.Press power 2.Press Camera wifi Botton 3.Display “Wi-Fi RC” →confirm 4.Select “Wi-Fi RC”→confirm 5.Wi-Fi RC→Select “NEW”→confirm 6.
B-2:For GoPro HERO 4 Camera set up 1.Press power 2.Select “SETUP” →confirm 3.WIRELESS→Select “OFF”→confirm 4.WIRELESS→Select “PAIR”→confirm 5.PAIR→Select “WI-FI RC”→confirm 6.
B-3:For GoPro HERO 5 Camera set up 1.Press and hold the mode key (turn the camera on) 2.Use you finger from top to bottom touch screen 3.Select “CONNECT”→Click on 4.Select “Connect New Device”→Click on 5.Select “Smart Remote”→Click on 6.
B-4:For GoPro HERO+LCD Camera set up 1.Press power 2.Select “SETUP” →confirm 3.Wireless→Select “wifi OFF”→confirm 4.Wi-Fi Mode→Select “REM CTRL”→confirm 5.REM CTRL→Select “NEW”→confirm 6.
B-5:For GoPro HERO 4session Camera set up 1.Press WiFi button (turn the camera on) 2.Press again wifi button→appear SELECT CONTROL 3.Select “ADD NEW”→confirm 4.NEW DEVICE→Select “RC”→confirm 5.
B-6:For GoPro HERO 5session Camera set up 1.Press WiFi button (turn the camera on) 2.Select “CONNECTION SETTINGS”→confirm 3.Select “CONNECT NEW DEVICE”→confirm 4.NEW DEVICE→Select“GOPRO RC”→confirm 5.
C: SET UP THE REMOTE 1.Make sure the remote is off 2.While holding red circle key (Do not let go) 3.Press power button and release power button 4.The remote control enters the pairing mode 5.appear Pairing of double arrows , then release botton 6.If the connection is successful, you will see the following screen on the Remote control 7.Then will be asked if you want to connect to more cameras. Press yes, and then repeat the first step above. Otherwise, select No 8.Press circle key confirm 9.
