User's Manual

ManualsBrandsShenzhen RuJaHe Technology ManualsWearable TechnologyBluetooth Sunglasses

User Manual

RH2001

Specification of Bluetooth Sunglasses

Bluetooth specification: V5.0

Frequency range: 2.402-2.480GHz

Transmission power: Class 2

Bluetooth mode: headset A2DP,AVRCP

Transmission distance: 10 meters

Music playing time: 5-6 hours

Phone call time: 4-5 hours

Battery capacity: 3.7V/230mAH

Charging voltage: DC5V/500mA

Charging time: 2-3 hours

Earphone power: 20ohm/0.5W

Receiving sensitivity: -40dbm

③

①

②

Summary of content (4 pages)

PAGE 1
User Manual RH2001 ① ② ③ Specification of Bluetooth Sunglasses Bluetooth specification: V5.0 Frequency range: 2.402-2.480GHz Transmission power: Class 2 Bluetooth mode: headset A2DP,AVRCP Transmission distance: 10 meters Music playing time: 5-6 hours Phone call time: 4-5 hours Battery capacity: 3.7V/230mAH Charging voltage: DC5V/500mA Charging time: 2-3 hours Earphone power: 20ohm/0.
PAGE 2
Audio range: 20Hz-20KHz Distortion degree: 0.2% 95dB Net weight: 32g Working temperature: -15C-55C Storage temperature: -20C–65C Pairing and connecting Bluetooth connection：RH2001 Pairing：The unit is in off state by pressing and holding the button #1 for 3 seconds to enter to the pairing state automatically. The red and blue light flash alternately. Next step, click the Bluetooth connection “RH2001”in a smartphone. Power ON/OFF Power On: Press the button #1 for 3 seconds, .
PAGE 3
Answer/end/reject/replay Press the button #1once to answer the incoming phone call Press the button #1 once to end up the phone call Press and hold the button #1 for 2 second to reject the incoming call. Press the button #1 once to stop playing music and press the button #1 once again to resume to replay. Indication of recharging battery. Recharge battery with micro USB wire, the red light is on during charging, the red light switches to blue light when fully charged.
PAGE 4
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.