Riimini i6 -[2.4GHz+IR] User’s Manual Ver:1.
Safety Precautions Safety Matters To avoid injury,death of personnel or damage to the equipment the operator must refer to the explanations in this User’s Manual. Battery: There is a lithium-ion rechargeable battery in this device.Don’t water this device,or put it in a humid environment for a long time or the device will be damaged. Attention to traffic safety (CAR PC): Do not use the device while driving.When you want to use it,please park your car.
Turn off this device in hospital Please turn the device off in areas with “no wireless device”indication. Wireless devices may interfere with implanted cardiac pacemakers,hearing aids and other. Medical implant devices. Interference All wireless devices may be subject to interference, thus affecting the performance of this product. Accissories Only use factory specified parts.Please use the supplied travel charging cable.the use of other charging devices may be dangerous.
Overview This is a wonderful combo,2.4GHz Wireless mini QWERTY keyboard,Touch Pad combo,with USB interface receiver. This groduct consists not only of normal wireless keyboard keys,but also of multimedia control keys and PC gaming control keys.It has built-in programmable smart touch pad-the world’s first Touchpad which can be used in horizontal and vertical directions.
The multifunctional combo with wireless keyboard & touchpad Touchpad The touchpad can be used in a horizontal or vertical position. To switch between horizontal or vertical mode, hold the Fn key and hit the Alt key. Connecting the receiver Take out the 2.4G dongle from the giftbox, and insert to the devices with a standard USB interface. Once connected, slide the power switch to the "ON" position located on the left side of the unit to establish the connection.
above in the diagram. Auto sleep and wake feature The keyboard also features an auto sleep and auto wake mode. If there is a long period of inactivity, the keyboard will automatically go into a sleep mode. During the sleep mode, the user can wake the unit up by pressing any key. The 2.4 GHz receiver and keyboard’s RF indicator will continue to flash and will not power down. Switching off the keyboard after use After finishing using the keyboard,push the switch to the off position.
Fully open type set-top box remote control HOW TO OPERATE 1. Press the Set1/Set2 of “Riimini” in 3 seconds, the Riimini 's light will be flash one time then long-time on; 2. Aim the Riimini 's infrared LED at your original remote control's infrared LED in parallel alignment (PS: the relative distance not more than 7 cm), then press any button on Riimini, the Riimini 's light will flash two times then long-time on, it is in learning status.
3. Press any button on original remote control, Riimini 's light will be flash three times then long-time on,it is success in learning. 4. Repeat the step 2-4, until finish learning all keys. 5. Press the set key or 10 seconds without any operation, the device will retire from the learning state.
Appendix Technical parameters Specification Measurements (L x W x H): 151mm x 59mm x 11mm Weight (grams): 98g The parameters on the top interface: Frequency range:2401-2480MHz Operational Range: up to 30 meters Transmit power : +4db Max. Operation voltage: 3.7V Operation current: < 50mA Charging current: < 300mA < 1mA Sleep current: The parameters on the bottom interface: Rated voltage:DC 3V Voltage range:2.3V~3.
Fedora-7.0 tested) HD Player,TV set Set-Top BOX ,DVD/VCD/CD equipment. Air Conditioning Remote Control. Maintenance Do not attempt to disassemble the device or replace rechargeable battery. Doing so will void the warranty. The battery will discharge if stored for a long period of time without usage. Use the specified charger. Disconnect the device after the battery has been fully charged. Overcharging the battery will shorten the life span of the battery.
Note: The device has to be kept a distance of 10cm from human body and its has no ad-hoc function. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this devic e may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.