S9-WIFI Manual Appearance Guide ON/OFF Night lights Lens Mode key SD Cardreader USB interface 1
Charge Please use a 500 -1000mA charger to charge the equipment. When charging, the blue indicator light is always on. When it is full, the blue indicator light is off.Can work while charging. Turn on the device Press the power button to start the device. After the device is started, the red indicator blinks slowly and the device enters the waiting state. Note: The red indicator blinks or is steady on. Hold down the mode button for 5 seconds to reset.
Remote mode Click "+" to configure a new camera to connect to wifi. Note: When using the camera for the first time, please connect the mobile phone to the 2.4g router first, and then follow the following steps to configure the camera to connect to WIFI.
① ② ③ ④ After connecting the DBG hotspot, note: be sure to return to the APP 4
⑤ ⑥ FAQ: Q1.Why can't APP search detect camera/can't configure network? A:Please confirm that the device is connected properly and check whether the APP permission is restricted. Q2.Why does the camera always ask for a username and password, or an incorrect username? A:The default password for the camera is 6666. If you forget the user name or password, you can restore the camera to factory Settings to get the original user name and password. Q3.
Description of ICONS and buttons on the video page Infrared lamp ON/OFF Switch left and right Settings Sharpness switch Switch up and down Listen Photo Indicator light ON/OFF Recording Talkback Only products with speakers are supported 6.Storage card If you need to store video content, you need to install an SD card.
FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.