Specifications

WED
WED
通
连接通话蓝牙 更换UI风格
扫码下载手机客户端
连接手表
手表充电与激活
手表客户端下载
话
功
能
简
介
手
表
功
能
简
介
手
表
功
能
简
介
手
表
功
能
简
介
常
见
问
题
与
解
答
常
见
问
题
与
解
答
1.扫描下方二维码下载应用.
2.也可以在应用市场直接搜索iband下载
3.也可以扫描手表上的二维码图标进行下载。
第一次使用产品前，请先用包装盒中的充电器给手表充电。（设备
输入电压为标准的无线充 5.0V，请勿使用其他规格的电源充电）
Watch charging and activation
Before using the product for the first time, please charge the watch
with the charger in the box. (The input voltage of the device is
standard wireless charging 5.0V, please do not use other specifications
of power supply for charging)
◆方法一：搜索设备绑定
打开APP，在‘设备绑定’界面搜索设备，点击绑定.
(注：后四位是手表MAC地址）
打开这个图标绿色为打开状态
◆方法二:扫码绑定
1.手表:快捷菜单-二维码
2.打开APP－‘设备绑定’－点击二维码图标
3.扫描二维码进行绑定。
在手表快捷菜单--设置--设备信息，将显示手表MAC地址，可以通
过设备列表中的MAC地址来确定你的设备；
手表绑定成功后，每次打开APP，手表会自动与手机连接，在APP
计步界面下拉可以同步数据。
手表快捷菜单，点击：电话图标，此时打开手机设置、蓝牙界
面搜索相对应的蓝牙型号，点击连接。
在功能列表界面双击旋转按钮切换UI风格。
该功能需要连接音频蓝牙，进入拨号时，可根据需
要输入电话号码后拨打。电话蓝牙连接后，不在电
话界面2~5分钟后就自动会断开，有电话进来3~5
秒会自动连接。
常用联系人：需要在APP端常用联系人栏设置添加，
设置的常用联系人将自动同步到设备，最多可以存
32个联系人。
功能可保存最近10条通话记录
在此界面可以查看计步相关数据。
可以查看最近三天的天气。数据由APP更新，请及
时连接APP更新。
在主屏幕长按3秒，进入表盘切换界面，左右滑动
切换，单击选定表盘，
旋转按钮：在表盘页旋转按钮，可预览所有表盘。
功能概览：二维码、通话智能省电模式（开启通话
智能省电模式，2-5分钟没电话进来，通话自动休
眠，电话进来自动连接,APP必须连接状态。）电
话、语音、亮度、设置、来电静音/振动。
手表与APP连接后，可控制手机音乐播放器
的暂停与开始，音量调节以及歌曲切换。
快捷菜单
表盘切换
音乐
在此界面可设置呼吸时长，节奏等。
呼吸界面
点击进入子界面，可以选择不同的运动模
式进行训练。
多运动
用手机支付宝扫码绑定，点击“同意协议并绑
定”绑定成功后，双双击主屏屏幕显示支付宝
的付款码，也可以解除绑定。
注：只有在中英文语言下才可进入功能。
支付宝
计步界面
天气
通话记录
常用联系人
通话功能
Introduction to call function Introduction to watch functions
Introduction to watch functions
Frequently perceived questions and answers
Frequently perceived questions and answers
Introduction to watch functions
This function needs to be connected to audio
Bluetooth. When dialing, you can enter the phone
number as required and then dial. After the phone
is connected via Bluetooth, it will be automatically
disconnected 2~5 minutes after it is not in the
phone interface, and will be automatically
connected 3~5 seconds after a phone comes in.
Favorite contacts: You need to set and add the
favorite contacts in the favorite contact bar on the
APP side. The set favorite contacts will be
automatically synchronized to the device, and up to
32 contacts can be saved.
Function can save the last 10 call records
On the main screen, long press for 3 seconds to
enter the dial switch interface, slide left and right to
switch, and click to select the dial,
Rotation button: rotate the button on the dial page
to preview all dials
Function overview: QR code, Call intelligent power
saving mode (When the call intelligent power saving
mode is enabled, the call automatically in sleeps
situation if no call comes in for 2-5 minutes, and the
call automatically connects when it comes in. Make
sure the APP be connected.), phone, voice,
brightness, settings, call mute/vibration.
After the watch is connected to the APP, you can
control the pause and start of the mobile music
player, volume adjustment and song switching
shortcut menu
Dial switch
music
Call log
Top contacts
Call function
在此界面停留2s会自动测量心率，也可以在APP中
开启定时测量功能。
心率界面
You can view step counting related data in this
interface.
You can view the weather of the last three
days. The data is updated by the APP. Please
connect to the APP in time to update.
In this interface, you can set the breathing
duration, rhythm, etc.
Respiratory interface
Click to enter the sub interface to select
different sports modes for training.
Multisport
Use mobile phone Alipay to scan the code for
binding, and click "agree to the agreement and
bind". After successful binding, double-click the
payment code of Alipay displayed on the main
screen, or you can unbind it.
Note: The function can only be accessed in
Chinese and English.
Alipay
Step counting interface
weather
If you stay on this interface for 2 seconds, your
heart rate will be measured automatically, or
you can turn on the timing measurement
function in the APP.
Heart rate interface
手表和血压计测量数值出现的偏差是由多种因素决定的，血压计测量部位是在肱动脉手表测量部位是在微动
脉的两个主要分支，正常情况下主动脉血压测量值和微动脉血压测量值会相差三到四十;如果你使用手表和血
压计同时进行测量，由于动脉里流动的是离心方向的血液，血压计测量时绑带使你的肘正中以下部位处于受
压状态，暂时血液无法顺畅的向下面的动脉分支流动血管紧张感增加，将使上下血压测量值偏差会更大。
1.洗澡水的温度比较高会产生很多的水蒸气，而且水蒸气是气相的，其分子半径小容易从手表的壳体空隙渗进去，
当温度降下来后又会重新凝结成液相的水滴，容易造成手表内部线路短路，损伤手表电路板，进而损坏手表。
2.lP68防水防泼溅防尘功能并非永久有效，防护性能可能会因日常磨损而下降。
3.不支持浸泡、长时间在雨中、严重沙尘、高潮湿环境下使用，另外，如内部进水导致手机出现的故障将无法提供
正常保修。
血压数值为什么跟血压计有偏差?
为什么不能佩戴手表洗热水澡?
为什么手表接收不到消息推送?
安卓手机设置:
1.确认在手机客户端开启了消息推送的开关:
⒉.确认消息在手机通知栏都可以正常显示，手表消息推送是通过读取手机通知栏消息进行推送;若手
机通知栏没有消息,手表将无法接收推送:(需要在手机设置中找到通知设置，开启微信、QQ、电话、
短信、手机客户端的通知开关。)
3.打开手环客户端的辅助功能设置。(在手机设置中找到辅助功能打开手环客户端的辅助功能设置。
苹果手机设置:
1.确认在手机客户端开启了消息推送的开关，
⒉.确认消息在手机通知栏都可以正常显示。
(需要在手机设置中找到通知设置，开启微信、QQ、电话、短信、手机客户端的通知开关。)
The deviation between the values measured by the watch and the sphygmomanometer is determined by a variety of factors. The
measuring position of the sphygmomanometer is in the brachial artery. The measuring position of the watch is in the two main branches
of the microartery. Under normal circumstances, the difference between the aortic blood pressure measurement value and the
microarterial blood pressure measurement value will be 30 to 40; If you use a watch and a sphygmomanometer to measure at the same
time, because the blood flowing in the artery is in the centrifugal direction, the bandage during the sphygmomanometer measurement
will make the part below the middle of your elbow under pressure, and temporarily the blood cannot flow smoothly to the lower artery
branches, increasing the tension of the blood vessels, which will make the deviation of the upper and lower blood pressure measurement
values larger.
1. The high temperature of the bath water will produce a lot of water vapor, and the water vapor is in the vapor phase. Its molecular radius
is small and it is easy to seep into the gap of the watch shell. When the temperature drops, it will condense into liquid droplets again,
which is easy to cause short circuit in the internal circuit of the watch, damage the watch circuit board, and then damage the watch.
2. The P68 waterproof, splash proof and dust-proof function is not permanently effective, and the protection performance may decline
due to daily wear.
3. It does not support immersion, long time use in the rain, severe sand and dust, and high humidity environment. In addition, if the
mobile phone fails due to internal water ingress, normal warranty cannot be provided.
Why does the blood pressure value deviate from the sphygmomanometer?
Why can't I wear a watch to take a hot bath?
Why can't the watch receive the message?
Android phone settings:
1. Confirm that the message push switch is enabled on the mobile client:
⒉. The confirmation message can be displayed normally in the mobile notification bar. Watch message push is done by reading the
message in the mobile notification bar; If there is no message in the mobile phone notification bar, the watch will be unable to
receive the push: (You need to find the notification settings in the mobile phone settings, and turn on the notification switches of
WeChat, QQ, phone, SMS, and mobile phone clients.)
3. Open the auxiliary function settings of the bracelet client. (In the phone settings, find the auxiliary function settings of the auxiliary
function opening bracelet client.
Apple Phone Settings:
1. Confirm that the message push switch is enabled on the mobile client,
2. The confirmation message can be displayed normally in the mobile notification bar.
(You need to find the notification settings in the mobile phone settings, and turn on the notification switches of WeChat, QQ, phone,
SMS, and mobile phone clients.)
Connect call Bluetooth Change UI style
(Note: the last four digits are the MAC address of the watch)
Open this icon. Green means open
Watch shortcut menu, click the phone icon, open the
phone settings and Bluetooth interface to search for the
corresponding Bluetooth model, and click Connect.
Double click the rotation button in the function list
interface to switch the UI style.
二维码
已连接
Scan the QR code to download APP
Connect the watchDownload the APP on Mobilephone
1. Scan the QR code below to download the application
2. You can also directly search for iband download in the
application market
3. You can also scan the QR code icon on the watch to download
◆ Method 1: search device binding
Open the APP, search for devices in the 'Device
Binding' interface, and click Bin.
◆ Method 2: Scan code and bind
1. Watch: shortcut menu - QR code
2. Open APP - 'Device binding' - click QR code
icon
3. Scan the QR code for binding.
In the watch shortcut menu - Settings - Device Information, the watch
MAC address will be displayed. You can determine your device through
the MAC address in the device list;
After the watch is bound successfully, every time you open the APP, the
watch will automatically connect with the mobile phone, and you can
synchronize data by pulling down the APP step counting interface.
QR code
Connected
EFh
AQ
RO
WQD
EFh
Message
WED
WED