User Manual

BLUETOOTH HEADSET

OPERATING MANUAL

A.Mini USB charging socket B.Earbud

C.Talk Button/LEDIndicator D. Microphone

SPECIFICATION:

Model: RB-T1

Bluetooth Version: 4.0

Operation frequeny: 2402-2480 MHz

Talk time: ≤Up to 5hours

Standby time: ≤100hours

Charge time: 2 hours

Wireless range: 10m

Connection: Support multipoint connection, can connection two sets of equipment at the

same time

Voice quality: HD Audio(16KHZ)

Weight: 5g

ACCESSORIES:

We have supplied you with 3 different size earbuds. Try all the size and pick the one that is

most comfortable and fit for you.

RB-T1 have equipped with 3 ear cap, to fit a new earbud, position the earbud over the

speaker housing and gently press down on the earbud.

CALL INSTRUCTIONS :

A. Power on: In the state of shutdown, press &hold the button for 2 seconds until the white

light is on, “power on”&“Bluetooth connected ”voice prompt will be heard.

B. Standby: White light blinks once every 7 seconds, after 5 min connectionless mode,

RB-T1 will be power off automatically.

C. Power off: Press & Hold Button for 2 seconds, the headset is power off and the red light

go on for 1 second.

D. Answer a call: when incoming call, please just press power button one time.

E. Hang Up a call: Tap Talk button once while on call.

F. Transfer a call: When you are talking, Press & Hold Button for 1 second, release the

button after tone, which can switch between the Headset and mobile phone call

at the moment.

G. Reject a call: Press & Hold Button for 2 seconds, release the button after tone.

H. Redial: while in connect standby mode, press & Hold button for 2seconds, redial last

number. Chinese voice prompt will be heard.

I. Low power prompt: when the Bluetooth is low power, there is "low battery" voice prompt.

J.Language switch: In the state of charging, Press button until the white light flashes twice,

then Voice from the Chinese into English or from English into Chinese.

PAGE 1
BLUETOOTH HEADSET OPERATING MANUAL A.Mini USB charging socket C.Talk Button/LEDIndicator B.Earbud D. Microphone SPECIFICATION: Model: RB-T1 Bluetooth Version: 4.0 Operation frequeny: 2402-2480 MHz Talk time: ≤Up to 5hours Standby time: ≤100hours Charge time: 2 hours Wireless range: 10m Connection: Support multipoint connection, can connection two sets of equipment at the same time Voice quality: HD Audio(16KHZ) Weight: 5g ACCESSORIES: We have supplied you with 3 different size earbuds.
PAGE 2
PAIRING INSTRUCTIONS: Open smart phone Bluetooth setting, Click “Add” or “Search “Bluetooth devices, select the "paired device: RB-T1" (if ask for a password, please enter “0000” ), then you can connect smart phone to Bluetooth Headset, pairing time is 90 seconds, if fail to pair, 90 seconds later, it will return back to the connectionless state. PS: In the process of Bluetooth Headset and smart phone Bluetooth pairing, the white light is in flashing fast state. B. Pairing two phones 1.
PAGE 3
COMMON PROBLEMS & SOLUTIONS: A. Can not turn on the Bluetooth Headset: Check whether the Headset is power shortage, or due to the misoperation, resulting in Headset program error, use charger to recharge it, then problem will be solved. B. Cannot search Bluetooth Headset: Check whether the Bluetooth Headset is in normal state of starting, or smart phone Bluetooth application procedures can be normal used. C.