It is forbidden to reproduce any part of this quick start guide without the permission of Rapoo Technology Co., Ltd.
Quick Start Guide Schnellstartanleitung Guide de démarrage rapide S100 Bluetooth Multi-Style Headset Bluetooth Multi-Style-Headset Casque Multi-Style Bluetooth
Power button / Turn on/off / Volume & Microphone Turn on/off Voice call Pair and connect Play/Pause To turn on, press and hold the power button; To turn off, press and hold the power button.
Indicator / Charging / Pair and connect The blue LED will blink once every 3s when Bluetooth is disconnected. The blue LED will blink rapidly when pairing. The blue LED will blink once every 5s when Bluetooth is connected successfully. The red LED will be on when charging. The blue LED will be on when fully charged. The red LED blinks when the battery is low, please charge the device. 1. Press and hold the power button until the blue LED blinks quickly when the headset is off. 2.
3. Select "Rapoo S100". 4. The blue LED will blink once every 5s when Bluetooth is connected successfully. Note: 1. The Bluetooth headset will save connected device information automatically, you don’ t have to pair it again. 2. Some devices need a password when connecting, please enter "0000". Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement: This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment.