User's Manual

Power On.
Push.
Plug the receiver into the usb port. The receiver will match the mouse automatically.
Open the cover to change battery.
Place the battery right as the sign
.
ப߭䐘俠Ұㄥ࢝௵
8'655ப߭
RAPOO
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of FCC RF Rules. Operation is subject to the following two conditions:
1) This device may not cause interference and
2) This device must accept any interference, including interference that may cause undesired operation of the device.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to
operate the equipment.
Canada Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
NCC警告語
ḍ᪮Ԣࡳ⥛䳏⊶䔏ᇘᗻ䳏″ㅵ⧚䕺⊩㽣ᅮ˖
㄀Ѡṱ
㍧ᔶᓣ䁡䄝ড়ḐПԢࡳ⥛ᇘ丏䳏″ˈ䴲㍧䀅ৃˈ݀ৌǃଚ㰳៪Փ⫼㗙ഛϡᕫ᪙㞾䅞᳈丏⥛ǃࡴ໻ࡳ⥛៪䅞
᳈䀁㿜П⡍ᗻঞࡳ㛑DŽ
㄀ಯṱ
Ԣࡳ⥛ᇘ丏䳏″ПՓ⫼ϡᕫᕅ䷓亯㟾ᅝܼঞᑆ󰩳ড়⊩䗮ֵ˗㍧ⱐ⧒᳝ᑆ󰩳⧒䈵ᰖˈឝゟذ⫼ˈᑊᬍ୘㟇
⛵ᑆ󰩳ᰖᮍᕫ㑐㑠Փ⫼DŽ
ࠡ䷙ড়⊩䗮ֵˈᣛձ䳏ֵ㽣ᅮ԰ὁП⛵㎮䳏ֵDŽԢࡳ⥛ᇘ丏䳏″䷜ᖡফড়⊩䗮ֵ៪Ꮉὁǃ⾥ᅌঞ䝿Ⱆ⫼䳏
⊶䔏ᇘᗻ䳏″䀁٭Пᑆ󰩳DŽ
將電源開關撥至ON,打開電源
將接收器連接至電腦的USB介面,接收器將自動匹配滑鼠
打開電池蓋更換電池
將電池裝入放平,電池規格:
1.5V AA*1
03037
2.4G Mini Receiver
2.4G 迷你接收器
Frequency Range/
載波頻率
: 2402~2479 MHz
Channel No./
頻道數目
: 16
Modulation Type /
調變技術
: GFSK
Date Rate/
傳送速率
: 1Mbps
2.4G Mini Receiver user guide
1. Plug the Mini Receiver into
a USB port of your computer.
2. Turn on the Wireless
Optical Mouse.
3. Move the Wireless Optical
Mouse to get connected with
the Mini Receiver.
03037
2.4G Mini Receiver
2.4G 迷你接收器

Summary of content (1 pages)