User's Manual

2.4GHz Wireless 3 key Mouse
Federal Communications Commission (FCC)
Notice
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received,
including interference that may cause undesired operation.
CAUTION!
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modifications could void the user authority to
operate the equipment.
Installation
1. Plug the Micro receiver into a USB port of your computer.
2. Insert battery into your mouse. Your mouse support 1 battery
operation.
3. Move the mouse to get connected with the Receiver.
ON/OFF the mouse
1. You can switch On or shut off the mouse by use the On/OFF
switch on the bottom of the mouse
Caution: before your mouse is connected with the receiver.
You need to keep the mouse at a distance of less
than 2 meter to the receiver to finish the initial
connection
Trouble Shooting
1. Check Micro receiver connection; try to inserting Micro
Receiver to another USB port on your computer.
2. No Connection between the mouse and the Micro Receiver.
Re-insert the Micro Receiver. Take out the battery from the
mouse and reinstall it.
P/N: 266-81611-0000