Wireless Presenter User Manual (Ver.1.0) Be sure to carefully read this user manual first for the proper use and keep it for future reference.
Product View 1
Key Function Function Description ①Working Indicator Indicator ②Low Battery Indicator: Light Press any key, if LED blinks quickly, please replace the 2
battery. Press to emit laser; release the button, the laser disappears.
Single click to Media Player “ Play/Pause” Long press to “Volume Up” Single click to “Close Window” Long press to “Volume Down” Power Push upwards to Power On; Switch Push downwards to Power Off. Note ①In Mac system Keynote software, only support Page Up, Page Down, Blank Screen and volume control functions. ②Nonsupport Hyperlink function for WPS office. Operating Hints 1. Pull the Mini USB receiver out of presenter, and plug in USB Port that available on computer, and power on then it works.
2. Upon the first installation on Mac, Keyboard Set Assistant may appear and prompt that the keyboard cannot be identified. Just click “Continue” to finish the installation, and then the presenter will work accordingly. 3. The receiving distance of Mini USB receiver will be decreased by disturb of electronic devices around. 4. If no operation for the presenter, it will enter into the sleep mode automatically, press any key to awaken. Battery Installation 1.
3. Insert 1x AAA battery into the battery holder; 4. Put the battery cover back into position. Note Ensure battery polarity (+) (-) is correct. Do not leave bad or exhausted battery in the device. Please remove battery if device is not used for a long period. If the device does not function correctly or if the operating range becomes reduced, try to replace the battery with new one.
Product Parameter Transmitter RF Frequency: 2.4GRF Control Distance: 30m Laser Distance: Up to 200m Laser Power: <1mW Laser Color: Red Battery: 1*AAA Working Voltage: 1.5V Sleep Current: 100uA Dimension: 138.0*20.3*16.5mm Weight: 42g Receiver Operation System: Windows,Mac Interface: USB2.0 , Compatible with USB1.1, USB3.0 Working Voltage: USB electricity supply ( 4.5-5.
Safety Tips 1. To avoid possible eye damage, never point the device at people especially their faces, or look directly into the device's laser beam. 2. Avoid pointing the device's laser beam at a mirror or other highly reflective surface. 3. Keep the device away from children playing. 4. Never view the device's laser beam using telescopic devices, such as a microscope or binoculars. 5.
9
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.