User's Manual

3
4
5
6
7
1
2
WIRELESS REMOTE CONTROL SET
IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS
● Read all instructions carefully before using the wireless remote control set.
● Open the package and check the machine for obvious damage. If there seems to be damage
discontinue use and contact the distributor.
INSTRUCTIONS:
● Use the wireless remtoe control SET with our fog machines only.
● Connect the power cord of fog machine into a power socket.
● Connect the plug of the receiver into the back socket of the fog machine.
● Turn of the fog machine and allow to warm up to operating level (approximately 5 minutes).
● After the fog machine has warmed up the red light on the receiver will light up, alerting you
that the fog machine is ready for operation.
● You need to remove the battery’s insulation tab at the back of the transmitter for
the first time you use it.
● Press the "ON" button to spray the fog and press the "OFF" button to stop the fog.
● Be sure to keep you fog machine at least 7 3/4 inches (20cm) away from any flammable
material.
1. Power Cord
2. Receiver Indication Light
3. Transmitter Indication Light
4. OFF Button
5. ON Button
6.Battery Insulation Tab Hole
7.Battery Insulation Tab
ATTENTION:
● Please obey all notices about peration,safey,and repair. Not obeying these notices will
damage the unit and may result in electric shock.
● Don't open the case of the wireless transmitter or receiver if you are not a professional
electrician.
● Keep clean and remove water.
● Indoor use only.
● If you need to repair the item, please contact distributor or professional repair works.