Sky® Lite 2.0 Laser Projector User’s Guide Model: Sky® Lite 2.0 LASER RADIATION DO NOT STARE INTO THE BEAM CLASS 2 LASER PRODUCT Diode Laser - Max. Output < 1 mW Wavelength 400-700 nm Classified per IEC 60825-1 Ed. 3.0.2014 Please ONLY use manufacturer-provided USB cord and adapter.
TABLE OF CONTENTS Notice...............................................................................................................................1 Introduction...................................................................................................................2 Before You Begin...........................................................................................................2 Parts List...............................................................................................
NOTICE CAUTION—Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
INTRODUCTION Thank you for purchasing the BlissLights Sky® Lite 2.0 Laser Galaxy Projector. This product is a unique indoor light fixture that uses patented laser and holographic technology to project thousands of moving pin-points of light against a transforming nebula cloud. Sleep under the stars, create a romantic starlit dinner, or take your home entertainment center to the next level. We hope you enjoy this incredibly unique lighting experience. Each unit provides up to 30 x 30 ft of coverage.
SETTING UP THE LASER PROJECTOR Before operating your laser projector, please read the “Before you Begin” section and “Notice” section of this user’s guide. 1. Remove protective film sticker from laser aperture. 2. Insert the USB power cord into a powered USB port or use the included wall adapter to connect to an available electrical outlet. 3. Place the Sky® Lite 2.0 on a flat solid surface and aim toward desired ceiling/wall. 4. Press the power button.
DEFAULT SETTINGS Once the laser projector is plugged in, it will enter the default mode where all effects are on. Use the buttons to change the effect settings and brightness. This light has a built-in timer that is designed to automatically shut off after 6 hours of operation. For Bluetooth compatible models, the auto timer increment can be changed or disabled via the BlissLights app. INSTALLATION TIPS • • Do not connect the light to a dimmer pack, as a dimmer accessory may damage the laser component.
BLISSLIGHTS LIMITED WARRANTY This product carries a limited warranty against defects in workmanship and materials. BlissLights LLC agrees to replace the defective product free of charge within the stated warranty period, when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse. For detailed warranty information for your country, please visit www.blisslights.com/warranty CAUTION This is not a toy.
Un-license band: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment.