User's Manual

D UserManual

QH-1085

Can be hung on the wal through the nail hole on the

back side.

2X1.5V AA batter operated

keep the code-matching button on the receiver pushed, and

push the button of the transmitter at the same time. Release

the code-matching button on the receiver as soon as the bell

rings, and then release the button of the transmitter

accordingly. In this case, the code matching of the doorbell

set is finished.

LED FLASHING INDICATOR

TUNES SELECTION SWITCH (16 tunes

selectalbe)

VOLUME SWITCH (low,medium

or high)

RING OPTION SWITCH:ring only,or LED

flash only,or combination of ring and flash

High Quality Loudspeaker

Can be put on the bable with the]

click-in base

Water proof push button with LED Indicator

Name plate

Wireless Digital Doorchimes

PAGE 1
D UserManual LED FLASHING INDICATOR TUNES SELECTION SWITCH (16 tunes selectalbe) VOLUME SWITCH (low,medium or high) RING OPTION SWITCH:ring only,or LED flash only,or combination of ring and flash High Quality Loudspeaker Can be put on the bable with the] click-in base Water proof push button with LED Indicator Name plate Can be hung on the wal through the nail hole on the back side.
PAGE 2
Set the fastening tab of the top cover into the slot of the base Use double-sided tape to fix the unit to the desired place. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID AND CHANGE ANNTENA WHICH THE MANUFACTURER PROVIDES. IT IS THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. Press here by hand to fix the top cover onto the base.