BH&MT BH + MT Series Quick Start Guide www.livall.
I.Introduction Thank you for choosing the LIVALL Smart Helmet. This Guide will instruct you on how to use this product. LIVALL follows the strategy of sustainable development. This Manual will be updated from time to time. If you need more detailed instructions, please see the "Important Information and Warranty Card" annex. You can also learn more about the helmet on LIVALL's official website.
II. Packing List Helmet x 1 Product tag x 1 Quick Start Guide x 1 Bling remote controller x 1 USB charging cable x 1 Important Information and Warranty Card x 1 III.
Adjust the length of the chinstrap Leave a gap as thick as one finger Correctly position the helmet 4 Check whether the buckle is properly fastened
IV. Operating Instructions(Please charge the battery before use.) Start-Up " □ " function button Press the " □ " button for 3-to-5 seconds POWER ON You will hear a voice saying "POWER ON". Orange light The orange tail light will blink twice indicating Start-Up was successful.
Connecting for the first time or switching devices One helmet can be connected to up to three LIVALL-authorized devices at the same time. After the handlebar remote control is connected, press the "left" or "right" button to control the helmet’s corresponding indicator light. 1. Connecting for the first time ≤5m Two "beeps" 2. Replacing device Turn on the device, which should be within 5 meters of the helmet. It will automatically connect the helmet.
Connect to the phone (Tip: Once connected, it can control the music player as well as make and receive calls. To ensure the stability of the connection, please try to position your mobile phone in front of you.) Helmet Headset " □ " function button "Click to connect" "Connected" "Pairing..." When the device is off, press and hold the " □ " button until you hear the "Pairing..." sound. Swith on the Bluetooth on your phone and scan for the "Helmet Headset" device. Click to connect.
Connect LIVALL Riding phone App (for use the Walkie-Talkie function and take photos) For Android: Start LIVALL Riding. The App will automatically connect to the helmet; For IOS: Follow LIVALL Riding guide to connect to the helmet. After the connection is completed, select a contact in the App and press the Walkie-Talkie button on the handlebar remote control to speak to the contact; press the camera button to activate the phone camera to take pictures.
Charging 0.5A USB port 3 HRS Red light To charge Charging time Charging complete Plug the USB charging cable into the USB port on the helmet. The tail charging light is illuminated in red, indicating that the helmet is being charged. It is recommended that the power of the charger is no less than 0.5A. Charging time takes about 3hours. When the charging indicator light turns off, it indicates that charging is complete.
V. Technical Specifications Bluetooth : BT 4.1 + HFP/HSP/A2DP Bluetooth distance : Max. 10 meters Charging port : Micro USB Electricity parameter : DC 5V/0.5A Charging time : 3 hours Battery life : The max. battery life of the light is 10 hours. Listening time for music is 3-to-6 hours. Standby duration: Max. 180 days Temperature : Temperature for use: 0°C~40°C. Temperature for storage: -20~60°C LIVALL's website : www.livall.com Instruction version : V2.
Designed and Manufactured in Shenzhen, China 345-BH60SE-A0EN
Important Information and Warranty Card www.livall.
LIVALL Important Information and Warranty Card Please read the Manual before using the product and keep it for future reference. I. Introduction and Declaration Before using a LIVALL helmet, please read all operating instructions and safety information in this Manual to ensure safe and proper use. LIVALL adheres to a strategy of sustainable development. This Manual (i.e.
II.Safety Precautions Please read the following simple guidelines. Failure to comply with these guidelines may be dangerous or break the law. Keep the product out of reach of children and pets: 1. Keep the product and all components out of reach of children and pets. Children and pets may swallow small parts, which may cause choking or other dangers. Turn on only when safe: 2. When use of electronic products is restricted or their use will cause interference or danger, please do not turn on the product.
9. 10. Comply with all related regulations and do not use this product in areas where blasting is in progress. Accessories and batteries: Use only our approved accessories and batteries as other accessories and batteries may damage the product and be dangerous. Connecting to other devices: When connecting the product to other devices, read the instructions of the other device for detailed safety instructions. Do not connect incompatible products. III.
5. 6. 7. 8. 9. overheating, explosion or fire. It is strictly prohibited to disassemble, crush, heat or burn built-in batteries; sharp objects, screwdrivers, etc. are forbidden from piercing or prying open the batteries. These actions may cause the battery to ignite or burn. If a battery's electrolyte gets into your eyes, there is a risk of blindness. If the electrolyte is accidentally splashed into your eyes, do not rub your eyes.
V.Warning and Important Tips (For Helmets) This helmet is designed especially for use with bicycles. Do not use it with motorcycles, motor1. 2. 3. 4. 5. 6. 7. mounted bicycles or other sports equipment or during other sporting activities. No safety helmet can completely avoid all unforseen impacts. Yet to achieve the best protective effect, the size of the helmet must be well fitted and make sure to fasten the buckle.
2. 3. 4. Do not charge the helmet continuously for more than 12 hours. Unqualified persons must not disassemble this product, its batteries or other accessories. In case of any malfunction in the product, its batteries or accessories, please contact LIVALL’s local sales center. When using products with a light, do not shine it into the eyes of people or animals nearby. Flashing lights into the eyes of those in close proximity may cause temporary loss of sight or visual impairment. VII.
VIII.Environmental Protection Information Table of Toxic or Hazardous Substances, Elements and Contents. Environmental Protection Use Period of the Parts: Product – 3 years; battery – 5 years; accessories – 10 years The Environmental Protection Use Period marked on this product indicates the safe period of use for the product under conditions of use specified in this Manual without toxic or hazardous substance leakage.
Tips for Using the Warranty Card By embracing the principle of "The Customer is the Focus", we fully protect your rights. Please note the following information: Please bring your valid warranty certificate and original invoice, which shall be completed by the 1. distributor of the helmet and stamped with the official seal, and may not be altered, otherwise it will be deemed as invalid. The serial number sticker on the helmet shall not be destroyed, otherwise the warranty will be invalidated.
LIVALL's Warranty Details I.Warranty Details If there is any discrepancy or omission between the following and any national policy, the national 1. 2. 3. policy shall prevail. The warranty time is 1 year after purchase. Any quality problem can be maintained for free or it can be replaced within 30 days after purchase if re-sale is available. LIVALL bears no responsibility for warranty over other product components. i.e, the Quick Start Guide, Warranty Card, etc. II.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
WARNING This helmet is intended for use for biking, skateboarding, inline skating. Not for motor vehicle use. The helmet is intended to reduce the risk of injuries to the head when an accident happens but it cannot protect against every kind of injuries. Do not make any changes to the helmet that might impair its protective capacity. Never use stickers,glue, paint or anything else that might impair the protective capacity of the helmet.
INSTRUCTIONS FOR USE AND CARE A. No Helmet can protect the wearer against all possible impacts. B. The Helmet is designed to be restrained by a strap under the lower jaw. C. To be effective, a Helmet must fit and be worn correctly. To check for correct fit, place helmet on head and make any adjustments indicated. Securely fasten retention system. Grasp the Helmet and try to rotate it to the front and rear.
Administrative Regulations on Low Power Radio Waves Radiated Devices warning Article 12 Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radio-frequency devices.
LIVALL Warranty Card To Be Completed Upon Purchase Product model ________________ Related accessories Bar code of product ________________ Bar code of accessories ______________________ ______________________ Distributor's name (with seal upon purchase) ________________________________________ Purchase date Other info. _______________________________ ________________ Below Is To Be Completed By Customer Customer name ________________ Tel.
Designed and Manufactured in Shenzhen, China Notified Body: ITS Testing Services (UK) Ltd., Centre Court, Meridian Business Park, Leicester LE19 1WD No. 0362 Original design manufacturer: Shenzhen Qianhai LIVALL IoT Technology Co., Ltd. Address: 904, R&D Building Tsinghua Hi-Tech Park, NanShan, Shenzhen, China Postal code: 518057 Website: www.livall.com E-mail: riding@livall.com Version No.: V2.0 FW For support or assistance, contact: support@livall.