User Manual

ENEN
How to use
Listen to music
A: Swiching on/off headset
Switch on :press and hold the MFB for 5 seconds ,blue led light is on for 1 second,
you can hear “Do”tone
Switch off” :press and hold the MFB for 5 seconds ,red led light is on for 1 second,
you can hear “Do”tone
B:Pairing the headset with Bluetooth devices
a) how to enter paring mode
Be sure BTH-201 in power off status rst, press and hold the MFB for 5 seconds,
till red and blue led blink alternately, or you hear the indication sound ”Do Do” twice
,then release the MFB button , The unit will become pairing .
b) Pairing the headset with Bluetooth devices.
Make the headset enter into pairing mode(please refer to “how to enter paring
mode”)
After searched, select”MA-826” in the device list
According to indication ,enter the password “0000” if needed. And press”connect”,
when successful connecting, the red led of the headset quickly blinks twice, then
the green led lighting every 4 seconds.
Remark:make sure your device has Bluetooth function
Answer Calling
Switch on the headset and make sure in the well connection with mobile phone.
here are the table for operation.
Function Status of headset Operation
Answer calling Ringing Short press MFB
Volume up Conversation mode Short press or long
press”+”key,when the volume is
adjusted to Maximum, you will hear
an indication tone
Volume down Conversation mode Short press or long press”-”key,when
the volume is adjusted to Minimum,
you will hear an indication tone
Warning: Excessive pressurer from the headphones can cause the hearing loss.
How to wear the headset
The string of headset is retractable, please adjust according to your comfortable
size, logo”L” represents left ear, logo “R” represents right ear. See below photo.
Charging your headset
Insert the usb charging cable into use port of PC.
Connect charging cable with the charging port of headset
When the red light is on, the headset is charging .
When the red light is off, the headset is charging fully.