MODEL NO.
Getting Started • • • Remove the unit from the box. Remove any packaging from the product. Please retain all packaging until you have checked and counted all the parts and the contents against the parts list. In the Box • • • • Bluetooth Digital Watch USB Charging Cable Quick Reference Guide Instruction Manual KEY FEATURES • • • • • • • • • Bluetooth Digital Watch Compatible with all Bluetooth enabled devices such as Smart Phones, Tablets, etc.
Description of Parts 3
Turning the Bluetooth ON Press and hold the Function button for 5 seconds.
Turning the Bluetooth OFF While the device is ON, press and hold the Function button for 5 seconds. The LCD will display “OFF” and the device would turn OFF.
Long Press and hold the Function Button for 7 to 8 seconds until the LCD displays “PAIring” indicating that the device is now in pairing mode. Activate the Bluetooth function on your Bluetooth Device (Mobile Phone or Tablet). Please refer to manufacturer’s instructions for instructions on enabling Bluetooth on your device. Once you have activated Bluetooth on your device, select the earphones “BT DIGITAL WATCH” from the list of available Bluetooth devices.
Ending a call Press the “Function Button” once when you finish your phone conversation. LCD will display “HangUP” and you have now ended your phone call. Rejecting a call When you get an incoming phone call, Long Press the “Function Button” until the LCD displays “REJECT” to reject the incoming phone call.
Press twice the “Function Button” for voice dialing and name the person on your Mobile Phone Contact list. Bluetooth watch would then automatically voice dial if it matches the name on your contact list. Last Number Redial Long Press the “Function Button” until the LCD displays “REDIAL” for last number re-dialing.
Long press the “Function Button” to switch between two calls. Press the Function button once to terminate a call and restore the other call. Call waiting service may not be available on all networks. Contact your network operator for more information. Setting the Time Press the “Mode” button and hold for 3 seconds to enter into time setting mode. Press S1 and S2 to set, the steps are Hour – Minute – Year – Month – Date – Exit the setting mode.
Setting Alarm Press the “Function” button once to enter into Alarm setting mode. Long Press the Function button again to set the alarm. Press S1 and S2 to set, the steps are Hour – Minute – Exit the setting mode. Charging the watch The USB Charging Port is on the right side of the Bluetooth Digital Watch. Insert the Micro USB plug here and other end of the USB Port to any USB charging port (Computer or USB AC Charging Socket). It may take up to 4 to 5 hours for a full charge.
Care and maintenance Read the following recommendations before using the Bluetooth Multi Media Speaker System. Following these you will be able to enjoy the product for many years. • • • • • • • Do not expose the unit to liquid, moisture or humidity to avoid the product’s internal circuit being affected. Don’t use abrasive cleaning solvents to clean the unit.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Limited Warranty This manufacturer's product warranty extends to the original consumer purchaser of the product. Neither the retailer nor any other company involved in the sale or promotion of this product is a co-warrantor of this manufacturer warranty. WARRANTY DURATION: All materials and workmanship are warranted to the original consumer purchaser for a period of ninety (90) days from the original purchase date. WARRANTY COVERAGE: This product is warranted against defective materials or workmanship.
experienced, a copy of your sales receipt or other proof of purchase to determine warranty status. C.O.D. shipments cannot be accepted.