PUDU Pager User Manual Model：PPCC01 SHENZHEN PUDU TECHNOLOGY CO., LTD.
(Image) 0A1 Watch Operation Guide 0 Copyright © SHENZHEN PUDU TECHNOLOGY CO., LTD. 2022. All rights reserved. Without the express written permission of SHENZHEN PUDU TECHNOLOGY CO., LTD., any unit or individual shall not imitate, copy, transcribe or translate part or all of the contents of the instructions without authorization, and shall not disseminate them in any way (electronic, photocopying, recording, etc.) For profit.
(Image) 0A1 Watch Operation Guide 0 Foreword Purpose This manual introduces the functions and technical specifications of the PPCC01 push button pager, which is convenient for users to understand and use the product. Audience This manual applies to: Customer Sales Engineer Installation and commissioning engineer Technical Support Engineer Notation convention The following symbols may appear in this manual and represent the following meanings.
(Image) 0A1 Watch Operation Guide 0 Table of contents 1. Safety instructions........................................................................................................... 4 2. Product composition........................................................................................................5 3. 4. 2.1 Introduction................................................................................................................ 5 2.2 Shipping list..................................
(Image) 0A1 Watch Operation Guide 0 1. Safety instructions Do not place the pager near a heat source or an exposed fire source, such as a microwave oven, an oven, a fire, a candle, or other place where high temperature may be generated, so as to avoid the malfunction or explosion of the pager. Do not use the pager in a wet place or near the magnetic field, so as not to cause the internal circuit failure of the pager. Do not wash or soak the pager directly to avoid damage to the components.
(Image) 0A1 Watch Operation Guide 0 2. Product composition 2.1 Introduction The PPCC01 push-button pager (hereinafter referred to as the pager) is a call notification device supporting LoRa, which shall be used together with the Purdue Technology pager gateway and the Purdue Technology robot supporting LoRa communication mode. Its call communication service system is based on LoRa LAN and cloud services.
(Image) 0A1 Watch Operation Guide 0 Product Explain characteristics Communication PUDU LoRa TSCH communication protocol protocol Operating power 8 μA (standby), 130 μA (typical), 50 mA (maximum/instantaneous) consumption Endurance Configure ≥ 1 year (typical) the Pingo Magnetic Configuration Interface interface Work environment Temperature: 0 ℃ ~ 40 ℃ Humidity: ≤ 85% RH Storage environment Temperature: -40 ℃ ~ 65 ℃ Humidity: ≤ 85% RH Button Document Version V1.
(Image) 0A1 Watch Operation Guide 0 3. Product use 3.1 Binding gateway and robot When the caller is used for the first time, the gateway is not bound, and the calling robot can reach the designated location only after the gateway is bound. The calling device is set and operated through the data line to realize the binding of the calling device and the gateway. The gateway is bound to the robot through the network. 3.
(Image) 0A1 Watch Operation Guide 0 Red is 5s Manually cancel the call always bright Document Version V1.
(Image) 0A1 Watch Operation Guide 0 4. After-sales policy 4.1 Free warranty service Shenzhen Purdue Technology Co., Ltd. promises to provide free product warranty service within the effective warranty period of the product (the warranty period of different parts of the product may be different, see the Warranty Period Table of Main Parts for details) from the date of product activation under the following conditions, and customers do not need to pay after-sales service fees.
(Image) 0A1 Watch Operation Guide 0 4.2 Failure and damage caused by force majeure (such as earthquake, fire, etc.). Other circumstances that do not meet the conditions of free warranty. Warranty period: the starting date of the warranty period shall be the date when the system records the activation of the product. For the warranty period of different parts of the product, please refer to the Table of Warranty Period of Main Parts.
(Image) 0A1 Watch Operation Guide 0 under the guidance of technicians, or non-man-made product quality defects are found; The round-trip freight is borne by Purdue Technology. 4.3 4.3.1 When the customer receives the goods, he unpacks and checks them in front of the delivery man, and finds that the products are damaged due to transportation. The round-trip freight is borne by Purdue Technology.
(Image) 0A1 Watch Operation Guide 0 4.3.3 Processing time for returning to the factory for maintenance After your maintenance application is approved, Purdue Technology Co., Ltd. will complete the maintenance for you within 30 days from the date of receiving the problem goods you sent back. If the service is delayed due to national statutory holidays or the after-sales service centers of some brand manufacturers, the repair time will be extended accordingly.
(Image) 0A1 Watch Operation Guide 0 4.6 More than 300 kilometers, 1000 yuan per time. Distance calculation method: The distance between the service store and the nearest service outlet of Purdue Technology is taken as the calculation standard. After-sales service consultation If you have any questions, please contact Purdue Technology Customer Service Hotline: 400-0826-660.
(Image) 0A1 Watch Operation Guide 0 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Cet émetteur ne doit pas être colocalisé ou fonctionner en conjonction avec une autre antenne ou un autre émetteur. The device meets the exemption from the routine evaluation limits in section 2.
