User's Manual

WX1905C
Wireless Charging
Power Bank
User Manual
Indicator
(1) To check the power level,press the button once,
the LED lights will indicate the power status.
Safety Precautions
Please note: Improper use may result in
product damage, decreased battery life and loss of
charging capacity not covered by the
manufactures warranty.
● Check device voltage for compatibility before use
● Only charge the unit from your computer or
a certified approved power adaptor
(certification depends on your region)
● Do not store WX1905-C in high or low temperature
environments, small enclosed areas without
ventilation or place in fire
● Do not drop, bump, throw or shake the unit,
this may damage internal components
● Do not disassemble or try to repair or modify
● Do not allow the unit to come in contact with
water or moisture
● If battery becomes excessively hot, emits odour,
gets dented or experiences any abnormal
deformity you should stop using it immediately.
● Only dispose of battery at authorized
recycling centre
● Do not use harsh chemicals or cleaning agents
on the exterior of this unit
Congratulations on your purchase! We recognize
the stress and annoyance of running out of
battery power when you are on the go, so we
created the power bank WX1905-C, a quick and easy
way to stay connected and powered up no matter
where you are.
Charging your Devices
Wireless Charging:
● Check if your device supports Qi standard wireless
charging;
● If it supports, place your device on the marked
wireless charging area on the power bank;
● If your device is placed on the correct position of the
power bank, one wireless charging indicator of the
power bank will turn on green whilst wireless charging.
● Note: The WX1905-C wireless
charging power bank is
engineered to work with the most lightweight
smartphone cases. However, if the back of the
smartphone case is thicker than 3mm or contains
metallic, magnetic or battery materials, it may affect
the funcitonatlity of the wireless carge.
.
● Insert one end of the charging cable
into the USB-A or USB-C output port of power bank.
● Insert the other end into your electronic device.
● Your device should indicate that charging has
started.
Charging the power bank
Please note: Before using your power bank for the
first time, please charge it to full.
This unit requires 3-4 full charges and drain cycles
before the battery is optimized to its full potential.
The unit should be recharged every 3 months when
not in use.
* Insert the regular USB end into the output USB jack
of computer or wall outlet adaptor.
* Insert the other end into the micro input or USB-C
port of the power bank.
Specifications:
● Battery type: Polymer battery
● Micro Input: DC 5V - 2000mA
● USB-C Input: DC 5V - 2000mA
● USB-C Output: DC 5V- 2100mA
● USB-A Output1: DC 5V-2100mA
● USB-A Output2: DC 5V-2100mA
● Wireless Ouput: 5W
● Total Output: DC 5V-2100mA
● Capacity: 5000mAh, 18.5Wh
● Size: 122*66*12.4mm
● Weight: 118g
Charging through USB-A and USB-C ports :
(2) The 4 LED lights indicate the power level
status of WX1905-C.
---4 lights --76-100% charge
---3 lights--51-75% charge
---2 lights--26%-50% charge
---1 light--0-25% charge
* The indicator is flashing showing it is charging.
* All indicators will light on continuously once fully
charged.
In DC 5V-2A
Out DC 5V-2.1A
Out DC 5V-2.1A
USB-C In DC 5V-2A
USB-C Out DC 5V-2.1A