User's Manual

Power Bank power status indication:
Short press power bank button, the 4 white LED
indicators show the remaining power of the power
bank, each of four LED lights shows 25% power.
Congratulations on your purchase! We recognize
the stress and annoyance of running out of
battery power when you are on the go, so we
created the power bank, a quick and easy way to
stay connected and powered up no matter where
you are.Featuring dual USB outputs, you can use
powerbank to charge your tablet, most
smartphones, MP3 players,mini speakers and
other digital devices.
With the user`s own Apple cable or connector, it
can also charge iPhone and iPad devices.
Charging your Devices
Charging the power bank
● The 4 white indicators will be flashing showing it’s
charging.
.
● The indicators will light continuously when power
bank is charged fully.
www.miuipower.com
WX1610-PD
Power Bank
User Manual
Power Bank Ports
Dock Ports
1. Charging via Type-C and micro input port of the
power bank:
● The power bank has 2 input ports:
Micro Input and Type-C port. Insert one end of your
cable into the output of a charger, and insert the
other end of the cable into the micro or Type-C port
of the power bank.
2. Charging via dock:
● The dock needs to be charged before it can
charge the power bank. Charge the dock by a
charger with the included
USB-C to USB-C cable.
The LED light on the dock will turn green showing
it’s charging.
● Put the power bank on the dock. the white LED
indicators of the power bank will be flashing showing
it’s charging.
Specifications:
Power bank:
● Battery type: Polymer battery
● Micro Input: DC 5V-2A\9V-2A
● Type-C Input(PD): DC 5V-3A\9V-2A
● Type-C Output（PD): DC 5V-3A\9V-2A\12V-1.5A
● USB Output: DC 5V-3A\9V-2A\12V-1.5A
● Wireless Output: 10W
● Total Output:18W
● Capacity:10000mAh/37Wh
● Size: :148*73*16.5mm
Charging dock:
● Type-C Input: DC 5~20V
● USB Output 1: DC 5V-2.1A
● USB Output 2: DC 5V-2.1A
1. Charging Wireless Devices:
Please verify that your device supports Qi wireless
charging Technology prior to using the wireless
charging function, as this facility will not be available
if your device does not support it.
If you device does support Qi Wireless Charging
Technology, place your device on the marked wirelss
charing area on the power bank;
The green wireless charging indicator of the power
bank will be flashing showing wirerless charigng is
working.
NOTE:
When using wirelss charging while power bank is being
charged on the dock:
If your wireless device suports fast wireless charging,
Customers need to use a PD fast charger
(minimum 30W PD charger is preferred) and the
included USB-C to USB-C cable
to charge the dock to enable your device enjoy fast
wireless charging. If Non-PD charger or other kind
of cable is used, the wireless charging speed will
not be fast but only normal wireless charging speed.
2. Charging via USB or Type-C ports
The power bank has 2 output ports:
Type-C port and USB port.
Charge your device through any output port of the
power bank with your device's cable;
Your device should indicate that it's charging.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following
two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class Bdigital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated
with minimum distance 20cm between the radiator & your
body.