Data Sheet

ManualsBrandsShenzhen Phaten Technology ManualsElectronicsWIFI module

Table Of Contents

T102 DATASHEET

Version

1.1

T102 Wi-Fi Module

1. Product Brief

T102_V1.1 is a low power embeded Wi-Fi Module. It contains a Wi-Fi Soc(RTL8710BN) and

integrate Network protocol stack. T102 Embeded ARM-CM4 MCU， 2Mbyte Flash，256Kbyte

SRAM。

T102 runs RTOS，integrate all Wi-Fi MAC and TCP/IP protocol stack.

1.1 Feature

 Embeded ARM_CM4 MCU

 CPU: 125MHz

 Voltage：3.0V-3

.6V

 Peripheral：9×GPIOs, 1×UART, 5×PWM

 Wi-Fi

 802.11 b/g/n

 Channel 1-14@2.4GHz

 Support WPA/WPA2

 802.11b +16dBm max output power.

 Support STA/AP/STA+AP

 Support SmartConfig (include Android and IOS）

 PCB Antenna

 Operating temperature：-20

℃ to 70℃

Summary of content (12 pages)

PAGE 1
T102 DATASHEET T102 Wi-Fi Module 1. Product Brief T102_V1.1 is a low power embeded Wi-Fi Module. It contains a Wi-Fi Soc(RTL8710BN) and integrate Network protocol stack. T102 Embeded ARM-CM4 MCU， 2Mbyte Flash，256Kbyte SRAM。 T102 runs RTOS，integrate all Wi-Fi MAC and TCP/IP protocol stack. 1.1 Feature  Embeded ARM_CM4 MCU  Voltage：3.0V-3.6V    CPU: 125MHz Peripheral：9×GPIOs, 1×UART, 5×PWM Wi-Fi  802.11 b/g/n  Channel 1-14@2.4GHz  Support WPA/WPA2  802.11b +16dBm max output power.
PAGE 2
T102 DATASHEET 1.2 Material Object Picture 2 T102 front view 2 Version 1.
PAGE 3
T102 DATASHEET 2. Module Interface Pin T102 has 2 11 pins，the width between two pins is 2mm: Picture 3 T102 Front T102 rear view view Pin definition： Table 1 T102 Pin Index Symb IO Type Feature 1 VDD P Module Power(3.
PAGE 4
T102 DATASHEET 3. Electrical parameters 3.1 Absolute Electrical parameters Parm Description Min Max Unit Ts storage temperature -20 85 ℃ VCC Voltage -0.3 3.6 V 3.2 Work condition Para Description Min Normal Max Unit Ta Operating Temperature -20 - 70 ℃ VCC Operating Voltage 3.0 3.3 3.6 V - - VCC*0.1 V VOL IO Low level VOH IO High Level VCC*0.8 - VCC V Imax IO current - - 16 mA Normal Unit 3.
PAGE 5
T102 DATASHEET 3.5 Working Power Consumption Work model AV Work status, Ta=25℃ MAX. UNIT Smart config WI-FI led fast flash 123 413 mA AP config WI-FI Led slow flash 140 413 mA Connected Wi-Fi Led on 19.6 413 mA Reconnected Wi-Fi Led off 70 413 mA 4. RF Characteristic 4.1 Basic RF characteristic Para Description Frequency 2.412~2.484GHz Wi-Fi Standard IEEE 802.11b/g/n(channel 1-14) Speed 11b:1,2,5.
PAGE 6
T102 DATASHEET 5. Antenna Info 5.1 Antenna Type PCB Antenna 5.2 Reduce Antenna interfere To ensure the Wi-Fi product has best RF performance, we suggest the min distance between the antenna and other metal is 15mm. 6. Package Info 6.1 Model Size Pic 4 T102 size Pic 5 T102 side view 6 Version 1.
PAGE 7
T102 DATASHEET 6.2 PCB Package Pic 5 T102 PCB Package 7 Version 1.
PAGE 8
FCC Regulatory notices Modification statement Shenzhen Phaten Technology Co., Ltd. has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. Interference statement This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s).
PAGE 9
Model: WIFI module Contains FCC ID：2AU7O-T102V11 The host OEM user manual must also contain clear instructions on how end users canfind and/or access the module and the FCC ID and ISED. Model: WIFI module Contains FCC ID：2AU7O-T102V11 OEM Statement a. The module manufacturer must show how compliance can be demonstrated only for specific host or hosts b. The module manufacturer must limit the applicable operating conditions in which t transmitter will be used, and c.
PAGE 10
Part 15 Subpart C Section 15.
PAGE 11
2AU7O-T102V11
PAGE 12
2AU7O-T102V11