Operation Instruction Of Bone Conduction Headset B2 B2S
Operation Instruction Of Bone Conduction Headset B2S 1, Characteristics introduction The headset employs the design thoughts of bone conduction headset’s principal and characteristics, hidden rear- hang microphone and open ears. Meanwhile, you can listen to or control music wirelessly- adjust the volume and change music(last or next). The voice communication employs echo removel process to ensure clear communication. The headset allows automatic change of music and communication.
2, Port functions 2.1), Work indicating lamp 2.2), Play/ stop/ multi- function button 2.3), Microphone port 2.4), Microphone port 2.5), USB micro- charging port 2.6), Volume/ select 3, Operation and usage (with mobile phone as example) 3.1), Under closing statues, press multi- function button for 3 seconds to launch it and the headset will automatically enter into matching model, with sparkling red and blue lights alternatively; under opening statues, press the button for 3 seconds to close it. 3.
3.4), When you receiving a call, the blue light will sparkle fast and the headset will have prompt tone for call receiving. Press multi- function button shortly to pick the call and then press the button to end the call. Press the button for 2 seconds can reject 2 seconds. 3.5), Under music play model, the blue light will sparkle slowly, and the multi- function button is used to play and stop and music.
4, Matters needing attention 4.1), For first time usage (or after long- time nonuse), please use the auxiliary USB- USB micro- charging cable to charge the headset for 2 hours. The red light will light when charging and the blue light will light after finishing charging. 2 hours charging is required for normal usage (notices: do not use the headset when charging). 4.
4.7), If it is prompted to input password when matching, please input 0000. 4.8), It is suggested to charge the headset a time a month for long term nonuse to keep the service life of the battery. 4.9), When the equipment connection distance exceeds the effective distance of (10m) the connection between headset and equipment will be cut. After then, once their distance be in effective distance, the connection will be set automatically.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.