User Manual

SM-9001
Dual SimCard for iPhone
26*$,45"35(6*%&
2. Install the SIM into the groove.

Specifications
CPU Brand
Frequency
Bluetooth
Battery
Working Time
Charging Duration
SIM Card
Battery Capacity
Standby Time
Selfie
MTK
850MHZ \ 900MHZ \ 1800MHZ \ 1900MHZ
4.0
Lithium ion
4.5 Hours
2.5 Hours
Micro
500mAh
100~120 Hours
Support
Product overview
Button
On/Off Switch: Press the button for 4S to turn on the device,press
the button for 3S will turn off the device,RED LED light will be shut
off after 7 seconds.
Button for Selfie:
Turn on the camera with APP opened, press selfie
button take selfie.
Instal the SIM card
1. Take out card pocket with a pin.
iPhone and
Valuables
32g
Safeguard
Weight
Compatible with
Size 85.0*54.0*4.0mm
Charge Prot
SIM Card
On/Off Switch
buzzer
Camera button
LED
iPhone\iPad\
iPod Tuch

3. Insert the card pocket back the device.
Charge the battery
You need charge the battery if you used the device first time
or have not used it for long time,
You will turn on the device when charging, the LED will
indicate red during charging, will change to green when
charging completed,
How to use the device
Install More Card:
Search and install “More Card”
from App Store.
Check the battery status
(Charging the device will automatically turn it on when it’s off),
indicator light is red when it’s charging, it turns to green when it’s
fully charged.
Selfie
1, When device connected with iPhone, iPad or iPod Touch, and
with APP opened, press selfie button to turn on the camera,
press again to take selfie.
2, Open the More Card APP, turn on the camera manually, press
the selfie button to take selfie.
Search your Phones
When device connected with iPhone, iPad or iPod Touch and
with More Card APP opened, press the selfie button for 3 seconds
and then release, the phone will rings twice, repeat the process till
find the phone.
Alarm
When device connected with iPhone, iPad or iPod Touch and
with More Card APP opened, if the distance between phone and
the device over 10 meters, the phone will ring for 4 times and the
device will ring for 100 seconds to remind you. This function can
be shut in the settings.
Install
“More Card”
APP

Connect the device with your iPhone\iPad&iPod Tuch
1.Turn on ‘Bluetooth’ with your iPhone from “Setting”
2.The device will enter “Bluetooth Search Mode”.
3. Open More Card APP( More Card will request to access
your MicPhone and contact when you use it for the first time,
please press “Allow” ),click “setting” then “Searching device”,
when your iPhone was found in the list, click “Connect”.
Make a call
1.Dial direclty :
Open More Card,
you could dial the num
ber from the keyboard
directly.

2.Dial the number in your
contacts:
Open More Card, select
the The contact and dial.
Open More Card:
You could find the messages
You received,Press write icon
at top right Corner, You
could edit and write a message.
Check and send message
APP Setting
1.Sound setting:
you could set the sound and
vibration patterns.
2. Privacy Setting:
you could set gesture lock,
SMS reply and blacklist.

3.Camera setting:
Open camera, you could
selfie With the “Camera
button” within 10 Meters.
4.Language setting:
Only English and Chinese
Available, other languages
will Be updated.
5. More configurations:
you could also set alert
when lost, beep accessory,
battery in percentage and
Bluetooth Selfie/Answer/
hang up.
6. Message reply:
You could send message
When you are not available
for a call.
The Company reserves the final interpretation of this quick start guide,APP is
subject to upgrade without further notice.
APP function updated in APP setting options in the User's Guide Learn.
Troubleshooting:
1, the phone will not work with the device:
Please check the Bluetooth on the phone is turned on;
Please check the device is turned on;
Please check the device is on pairing status, has not connected with
other phones.
2, Phone has connected with device but there’s no network signal:
Check that theSIM card is valid and properly installed;
Turn the device off, remove the SIM card reload, and then turn it on;
3, Can not take selfie photo:
Make sure the distance between your phone and device is within 10
meters;Please turn on the camera in the APP.
4, The distance between your phone and device is more than 10 meters,
but they don’t send alarm:
Select "More Settings" and turn on the alarm.
5, Can not charge the device:
Check the power adapter is properly plugged into an electrical outlet;
Replace the power adapter;
Check the charging cable is properly inserted, or replace charging cable.
Safety Caution
This safety caution contains content applies to the mobile devices. Some
may not apply to your device, in order to protect you and others from harm,
or to protect your equipment from damage, please read the safety caution
before using the device.
Do not use a damaged power cord or plug;
Insecure connection can cause electric shock or fire;
Do not touch the power cord with wet hands, or by pulling on the cord
charger allocated under way;
Doing so may cause an electric shock death;
Do not bend or damage the power cord;
Doing so may cause an electric shock or fire;
Do not use or touch equipment with wet hands while charging;
Doing so may cause an electrical shock;
Avoid short circuit;
Doing so may cause electric shock or fire, battery may failure or explosion;
Do not use the device outdoors during thunderstorms;
Doing so may cause electric shock or equipment failure;
Do not replace the battery;
Otherwise it will cause damage to the equipment;
Do not drop the device.
Handling Device:
Do not place the device in a fire, do not place the device on heating
equipment (such as microwave ovens, oven or radiator) near or inside the
equipment from overheating could cause the battery to explode.
Do not crush or puncture the device;
Do not allow the device to external high pressure, it may cause an
internal short circuit and overheating;
Do not use your device in the case may be affected by radio frequency
interference like hospital, plane or car, etc.
Do not use the device at a refueling;
Do not use the device in the vicinity of the device or instrument;
emitting radio frequencies;
Radio frequency may cause the device to malfunction;
This device is electromagnetic radiation Specific Absorption Rate (SAR)
maximum of 1.216W / kg,
conform to the national standard GB 21288-2007