FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
LOCATION OF CONTROLS 8 1 5 4 7 11 2 10 6 3 9 12 1. 2. 3. LED Display Button Button 4. 5. 6. 7. 8. 9. Volume Control/ USB Type-C Port USB QC3.0 Port Headset Headset Base FM Transmitter Knob 10. Button 11. Indicator 12.
OPERATION For listening to music from your BT Device through the unit and your Car Radio, follow the steps below: PAIRING: Step1: Pairing the unit to your Car Radio: 1. Connect the unit to the car cigarette lighter socket as illustrated below: 2. The unit will automatically power on and the LED Display on the Unit will illuminate & blink. The voltage of the car battery will appear on the LED Display at first.
3. Then a default FM Channel will appear on the unit as illustrated below (For example: 88.1MHz).. 4. The Headset on the Unit will start to charging and the Red Indicator on it will illuminate (When charging is complete, the Red Indicator will turn off). Turn on your Car Radio and enter the radio FM mode as usual. Search for a blank FM channel without any radio signal received (For example: 107.0 MHz). 5. 6.
Step 2: Pair your BT (Bluetooth) Device to the FM Transmitter on the unit: In first time use or re-pairing the FM Transmitter on the unit to a new BT Device, pairing it as below: 1. Power on and pair the unit to Car Radio as step 1 above. 2. Power on the external BT Device and enter to BT mode. Start pairing the FM Transmitter on the unit following the screen instruction from the external BT Device.
LISTENING TO MUSIC THROUGH PAIRED BT DEVICE 1. After step 1 & 2 & 3, now you can play the music or answer the incoming call with the paired BT Device as usual. 2. During playback: Turn the Volume Control/ Knob on the unit to adjust volume level as desire. (Or, use the Volume Controls on the Car Radio or paired BT Device to adjust volume level). Press the Volume Control / Knob to pause; press again to resume normal playback. Press the or Buttons repeatedly to skip tracks. 3.
The Headset can be used as a independent BT Headset, once paired with the external BT Device, you can play the music or answer the incoming call with the paired BT Device as usual. NORMAL OPERATION AFTER PAIRED 1. Power on the external BT Device and enter to BT mode. 2. Power on the Car Radio and previously receiving the preset FM frequency same as the preset of unit (For example: 107.0 MHz). 3. Connect the unit to the car cigarette lighter socket.
BUILT‐IN USB QC3.0 FAST CHARGER The unit has a built-in USB QC3.0 Fast Charger. Use it to charge the external Device as below: 1. Connect the unit to the car cigarette lighter socket to power on the unit. 2. Connect the full size USB Plug of the charging cable (not included, to realize fast charging, the USB charging cable must be a fast charging cable) from the USB QC 3.0 Port to the external Device. 3. Fast charging will automatically start.
TROUBLESHOOTING Check the following before requesting service: SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION Car Radio no sound The radio frequency between the unit and Car Radio mismatch Found and set the radio frequency of the Car Radio and unit in the same frequency No sound or Volume of the unit was set to minimum Increase the volume by turn sound weak position the Volume Control/ Knob on the unit clockwise.
For customer service on this product, Please call 1-888-516-2630 10 December 31, 2019_V1