User's Manual

IPODFM transmitter has a digital FM transmitter function, so you can enjoy in the car through the sound

of high-quality digital music. Its attractive appearance, especially the unique blue glare screen allows you

refreshing versatile, easy to use.

Technical parameters:

1.Blue LCD display built-hyun

2.Apply to Iphone and all iPod models

3.Receiver Sensitivity: <-80dB (Per 1%)

4.Signal to Noise Ratio: (SNR> 68DB)

5.Frequency range: Full frequencies 88.1-107.9Mhz 0.2Mhz/step

6. car charger power supply (9-15V), while work for iPhone / ipod charger

7. Effective distance: ≥ 10m

8. Ambient temperature 14-122F.0-95%.

9. Audio Interface: iPod audio ports, 3.5 audio interface

Instructions

: Open the car radio, transferred without the radio frequency

* FM transmitter to connect with iPhone / iPod.

* Press “Power” key to boot.

* Adjust the volume and frequency of FM radio (no radio emission

points).

Press “Up” or “Down” key to adjust the transmission frequency, so the

same with the FM radio frequency.

PAGE 1
IPODFM transmitter has a digital FM transmitter function, so you can enjoy in the car through the sound of high-quality digital music. Its attractive appearance, especially the unique blue glare screen allows you refreshing versatile, easy to use. Technical parameters: 1.Blue LCD display built-hyun 2.Apply to Iphone and all iPod models 3.Receiver Sensitivity: <-80dB (Per 1%) 4.Signal to Noise Ratio: (SNR> 68DB) 5.Frequency range: Full frequencies 88.1-107.9Mhz 0.2Mhz/step 6.
PAGE 2
FCC ID: W8D-F18 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.