User's Manual

FM transmitter
Model:F10-A
Instructions:
1. Turn on your car radio and tune to an unused FM station.
2. Place your ipod / iphone ito the Flexpod dock
3. Now secure your ipod / iphone into place by adjusting the Cradle Wings.
4. Connect your ipod / iphone to the Flexpod dock with the supplied ipod connector.
5. Plug the Flexpod into car lighter,the lcd display will turn on.
6. Adjust angle of the Flexpod using knob in back of the dock and the flexible neck.
7. Use the up / down frequency selector,to the right of the LCDscreen,on the Flexpod to match
the frequency of the unused FM station on radio that you have choosen.
8. You can also use the Quick Scan (QS)button to quickly scan frequencies.
9. Please note:use the manual station changer on will bring you to the next broadcast station.you
want an unused station.
10. To release our ipod / iphone press the Cradle lock Release button.
To power supported USB devices
You can also charge other USBen abled devices such as mobile phones ,and Bluetooth headsets
with your Flexpod.You should use the specialized charging cable that came with your device .You
can also use the supplied USBcable if your device will accept a mini USB plug. plug in the USB
cable into the USB port of the Flexpod to begin charging
3G iphone / iphone hands Free function:
If you want to use this function while you are listening to music:
1. After connecting your 3G iphone / iphone to the Flexpod with the supplied ipod
connector,also hand’s free port to your device’s headset outlet.
2. When your receive a call,just press the “Answer” pause and you will hear the conversation
through your speakers.
3. Your voice will be picked up via the microphone built into your iphone.
4. After ending the call ,the music will automatically resume.
5. Your can make outgoing calls by dialing the phone number and pressing the Talk button on
the conversation through your car speakers .
6. To release your ipod / iphone press the wing release button.