Conference Speakerphone Users’ Guide (USB Wired, RF2.4G Wireless & USB wired, Daisy chain Series) VERSION V02 Please read this Manual before set up Camera, and stick to its requirements strictly for Safety reason. Suggest you keeping this manual for future inquire reference.
Thanks for purchasing our products. Please kindly read this guide book carefully so that you can make use of the product better and properly. Note: this manual book is including Wired, Wireless, and Daisy chain dual chat pods products. Any questions or arguments, we reserve all the rights for the final explanation. Copyright Notice All contents of this manual, whose copyright belongs to our company. Cannot be cloned, copied or translated without the permission of the company.
Content PRECAUTIONS ........................................................................... 4 PACKING LIST ............................................................................ 5 BUTTON FUNCTIONS ................................................................................. 8 LEDS INDICATOR INSTRUCTION ................................................................ 9 REMOTE CONTROL ..................................................................................
Precautions Ensure your hands are dry when connecting or disconnecting the microphone or cables. Failure to observe this may result in electric shock or damage to the product. Do not install the product anywhere it will be exposed to dust or humidity, oily smoke or steam, or corrosive gas. Failure to observe this could result in fire, electric shock, or damage to the product. Do not place the product outdoors or in a location where water may drip on it.
Failure to observe this may result in electric shock or damage to the product.17 Ensure not to install the product anywhere unstable or where it will be exposed to vibrations as it could fall over or turn upside down, thus resulting in injury or damage to the product. Do not disassemble the speakerphone, in case of abnormal operation, contact your authorized dealer or the store where you purchased the product.
USB & Wireless Speakerphone S/N Product name Q’ty 1 Wired/Wireless Speakerphone device USB Cable 1.5m RF 2.4G receiver DC 5V 1A Charger Portable storage bag Bag for accessories Manual Book 1 unit 2 3 4 5 6 7 1 pc 1 pc 1 pc 1 pc 1 pc 1 pc Daisy Chain speakerphone S/N Product name Q’ty 1 Wired/Wireless Speakerphone device USB Cable 1.5m RF 2.
Structure ① Speaker Outputs an incoming voice from remote party ② Microphone Full duplex OMNI‐Directional microphone pick up voice of people who are speaking Audio port 3.5mm port for earphone or amplifier ④ Power charge port Mini USB port ⑤ Wireless receiver RF2.
Button Functions Microphone mute button Speaker Mute Power Button HiFi Mode Used to temporarily turn off (mute) the microphone, to cancel the function, press it again. Mute status indicator is Orange color. Press to temporarily turn off (mute) the speaker. To cancel the mute function, press it again. Status indicator is orange color Press to turn the product on. Press and hold the power button for two or more seconds to enter standby mode.
LEDs Indicator Instruction LEDs indicator show working status: Microphone Muted Speaker Muted HiFi Mode Volume Down default Turn on Orange color Microphone muted default Turn on Orange Speaker Muted default Turn Off HiFi function Blue Music Playing mode Blue Volume status Flicker Blue Blue Volume Up Receiving volume adjust operation Volume status Flicker Blue One time press power button Receiving volume adjust operation to show the capacity of battery as Orange color LEDs, it change
Remote Control Remote control unit is supplied on request only. There are 8 buttons at the bottom of the remote controller to control the speakerphone. Power turn on/off Speaker Switch Indicator light is orange when speakerphone turn off Volume Down If the volume turn to the minimum, the indicator is blue and flicker. Volume Up If the volume turn to the maximum, the indicator light is blinking blue.
Mode shift Mode shift from conference mode to music mode. In music mode, the maximum volume is rather loud, microphone is prohibit using and the indicator light for speaker switch is blue. In conference mode, the maximum volume is rather low, the microphone can be used. System Requirements Use a PC that meets the following requirements. OS: Windows 7 (32bit), Windows 8/Windows10/Android 4.
Plug in the USB receiver to your PC/Laptop Plug in the USB receiver to USB port of the PC or Laptop, and it will install the standard driver automatically. While the USB receiver is paring the unit, the 3 leds light up Blue. Select the speaker output that suits your environment. For details, refer to "Selecting a speaker" (page 11). Adjusting the speaker volume Adjust the speaker volume that suits your environment. Tips: Connect this unit to the PC using the supplied USB cable (wired type).
Connection Connect the speaerkphone unit to PC using the supplied USB Cable or the USB dongle; The USB driver is automatically installed on the PC.
Daisy‐chain connection of Dual chat pods Two units speakerphone can be daisy chained wirelessly to each other without any software or driver required. Daisy chaining the Chatpods is useful for having a meeting in a larger conference Room, allows you to connect an optional microphone to extend the sound pickup range or playback range.
Check the connection Follow the procedure below to check whether the PC recognizes this unit properly. • Check that this unit is recognized properly while all the peripheral devices are connected. When using a PC (Windows 10 as an example) 1. Click the “start” menu and click “Control panel”. 2. Click “Hardware and Sound” 3. Click “sound”, The "Sound" screen appears. 4. Check the settings. "Default device" in "Sound playback": 2.4G Audio Device "Default device" in "Sound recording": 2.
Normally, "2.4G Audio device" is automatically set when this unit is connected to the PC. 5. Click "OK" to close the "Sound"screen. Troubleshooting Refer to the following tables when this unit does not function properly. If the problem you are experiencing is not listed or the instruction does not solve, please contact the retailer or dealer who you purchased the product from.
interfered the USB receiver distance away from USB receiver The audio from this unit cannot be heard on the other unit. The microphone is muted Turn off the microphone on this unit. mute function. The microphone Increase the microphone sensitivity is set to the sensitivity. minimum. The speakers are muted on the other unit. Check default playback Click Control Pannel and device setting. check default device setting is 2.4G audio device. the unit generates feedback noises.
Specification Model No.
Button Power on/Off, Mute Mic, silent speaker, HiFi mode, functions Volume UP/Down Power DC5V±0.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.