User Manual

Remote control manual
Match code:
1) Turn off the 2 bulbs by push switch (not remote control);
2) Remove one of the bulbs, then turn on another bulb by push switch , press
"group 1 on" once as soon as possible within 3 seconds, the bulb will flash 3 times,
this bulb is paired to "group 1" successfully.
3) Repeat step 1, put on the other unpaired bulb, then turn on the 2 bulbs by push
switch , press "group 2 on" once as soon as possible within 3 seconds, the
unpaired bulb will flash 3 times, this bulb is also paired to "group 2" successfully.
Clear code:
1) Turn off the 2 bulbs by push switch (not remote control);
2) Turn on the 2 bulbs by push switch , within 3 seconds, press "group 1 on" 8
times continuously, the bulb of "group 1" will flash 5 times, code of this bulb is
cleared successfully.
3) Repeat step 1, remove the cleared bulb, then turn on the other bulb by push
switch , within 3 seconds, press "group 2 on" 8 times continuously, the bulb of
"group 2" will flash 5 times, code of this bulb is cleared successfully.
All ON
Long press: 3 lights cutover
All OFF
Long press: nightlight
Brightness + /Speed +
Yellow light + /mode +
White light + /Mode -
Indicator
Brightness - /Speed -
30 minutes timing off
Group 1,2
RGB color (7 colors)
RGB auto play (3 types)
60 minutes timing off
Long press to exit RGB