Shenzhen Ogemray Technology Co., Ltd IEEE 802.11 b/g/n Wireless USB Adapter Product Specifications Model: GWF-3M05 Version: 1.3 2010-12-27 Information in this document is subject to change without prior notice.
Shenzhen Ogemray Technology Co., Ltd 1. Introduction GWF-3M05 is Wireless USB Adapter supporting IEEE 802.11 b/g/n standards with 6-pin connector supporting USB 2.0 interface. This is a low cost compact Wireless USB Adapter designed in the product with embedded system for the wireless connectivity. 1.1 Scope: GWF-3M05 Wireless USB Adapter is designed to operate in 2.4GHz ISM frequency band, it applies a highly integrated MAC/BBP and RF single chip RT3070 with 150Mbps PHY rate supporting.
Shenzhen Ogemray Technology Co., Ltd Bus Interface USB 2.0/USB1.1 USB Interface 6-pin, 2.0mm pitch male jumper , or 1.0mm pitch connector Antenna Impedance 50 ohm 2.2 Hardware Information GWF-M05 is low power consumption and low-cost compact Wireless USB Adapter. 2.2.1 Block Diagram Figure 1: System Block Diagram of GWF-3M05 5.0V Wireless USB Adapter Figure 2: System Block Diagram of GWF-3M05 3.3V Wireless USB Adapter Information in this document is subject to change without prior notice.
Shenzhen Ogemray Technology Co., Ltd 2.3 Software and system Information Operation System CPU Supplier Driver Linux 2.4/2.6 ARM, MIPSII Available Windows 2000/XP/Vista X86 Platform Available Windows CE 5.0/6.0 ARM, MIPSII Available 2.4 Mechanical Information 2.4.1 OUTLINE and USB Connection Information (40x18mm) a). 6-pin 1.0 mm pitch connector. b). 6-pin 2.0 mm pitch male jumper. Information in this document is subject to change without prior notice.
Shenzhen Ogemray Technology Co., Ltd (To be noted: For special application, the direction of the male jumper can be upside down mounted) 2.4.2 Pin definition: Pin 6-pin 1.0mm pitch connector 6-pin 2.0mm pitch male jumper 1 VCC (3.3 VDC or 5.0VDC) VCC (3.3 VDC or 5.
Shenzhen Ogemray Technology Co., Ltd GWF-3M05-33-T, for 3.3+/-5%VDC, the long pins are at the same side with the shield case. GWF-3M05-33-B, for 3.3+/-5%VDC, the long pins are at the opposite side with the shield case. GWF-3M05-33-C, for 3.3+/-5%VDC, Soldered with 6 pin connector. GWF-3M05-50-T, for 5.0+/-5%VDC, the long pins are at the same side with the shield case. GWF-3M05-50-B, for 5.0+/-5%VDC, the long pins are at the opposite side with the shield case. GWF-3M05-50-C, for 5.
Shenzhen Ogemray Technology Co., Ltd PARTICULAR PURPOSE OR NON-INFRINGEMENT. We uses reasonable efforts to include accurate and up-to-date information on this document; it does not, however, make any representations as to its accuracy or completeness of the information, text, graphics, links or other items contained within these materials. Your use of this Document is at your own risk.