Neo_N703 WCDMA Module User Guide Version 1.
Neo_N703 WCDMA ModuleDemo Board User Guide Copyright © Neoway Technology Co., Ltd 2016. All rights reserved. All Rights Reserved No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Shenzhen Neoway Technology Co., Ltd. Trademarks and permissions is the trademark of Neoway Technology Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.
Neo_N703 WCDMA ModuleDemo Board User Guide Table of Contents 1 Getting to Know the N703---------------------------------------------------------------------------------------1 1.1 N703 Pin Description------------------------------------------------------------------------------------------------------2 1.2 N703 PCB Foot Print-------------------------------------------------------------------------------------------------------5 1.
Neo_N703 WCDMA ModuleDemo Board User Guide Thank you for purchasing Neoway N703 WCDMA Module Note: This manual briefly describes the preparation, the process for installing and safety precautions for using Neoway N703 WCDMA Module. You are recommended to read the manual before using the N703. The signal strength and the transmission rate are affected by the actual environment. 1 Getting to Know the N703 The follow figure shows the appearance of the N703.The actual produce may differ.
Neo_N703 WCDMA ModuleDemo Board User Guide GN D 60 57 61 GND GN D AN T N C GN D 62 GND 59 58 N C GN D 63 Top view of N703 GND GND I2C_SCL I2C _SDA 1 2 3 56 55 54 NET_LIGHT NC VDD_EXT_1V8 4 5 6 53 52 51 NC NC 7 8 9 MIC2_P MIC2_N SPK_OUT_N SPK_OUT_P REC_P 10 47 REC_N 11 12 46 45 44 43 DTR 42 41 SPI_CS SPI_MISO SPI_MOSI SPI_CLK TOP VIEW 13 14 15 GND NC 40 39 38 37 NC NC RING PWRKEY RESET VBUS 3 6 28 UIM_DETEC T GND 34 USB_DP 3 5 25 26 27 22 23 24 UIM_DATA UIM _CLK
Neo_N703 WCDMA ModuleDemo Board User Guide 38 PWRKEY DI ON/OFF control 1.2V
Neo_N703 WCDMA ModuleDemo Board User Guide USB_DP DI/O USB data positive signal data transmission 35 36 VBUS P USB voltage test 4.2V~5.5V, typically 5V SPI Interfaces 39 SPI_CLK DO SPIclock output 40 SPI_MOSI DI/O SPIdata input 41 SPI_MISO DI/O SPI data output 42 SPI_CS DO SPI enabling 31 ADC0 AI ADC0input 32 ADC1 AI ADC1input DO I2C clock output -0.3V
Neo_N703 WCDMA ModuleDemo Board User Guide 1.2 N703 PCB Foot Print LCC packaging is adopted to package the pins of the N703 module. 0 shows the recommended PCB footprint. (Unit: mm) PCB foot print recommended for N703 1.3 N703 Installation Guid Welding the N703 onto the Main Board of PC 、Mini PCI Board or other Embedded Main Board. For Example, Welding the N703 onto Mini PCI Board. Copyright © Neoway Technology Co.
Neo_N703 WCDMA ModuleDemo Board User Guide For Example, Welding the N703 onto Embedded Main Board. Copyright © Neoway Technology Co.
Neo_N703 WCDMA ModuleDemo Board User Guide 1.4 Requirements for the PC To use the N703, the PC must meet the following requirements: Windows 2000 SP4, Windows Xp SP2, Windows Vista, Windows 7-10 and Linux 2.6.18 or above. The hardware of your PC must meet or exceed the recommended system requirements for the installed version of OS. Display resolution:800*600 or above. At lest one WWAN Mini PCI Express interface or one USB interface .
Neo_N703 WCDMA ModuleDemo Board User Guide 3 Using N703 with Embedded Main Board on PC You can also use N703 Module with your computer to connect to the internet, One N703 Module and a Embedded Main Board (Demo) is needed. 3.1 N703 Embedded Main Board (Demo) description 1 Connect USB-to-Serial (PL2303) to a computer. ○ 3 Connect to a DC 5V power supply. ○ 2 DC 5V power supply switch. ○ 4 Insert a GSM or WCDMA SIMcard for Using. ○ 5 N703 Module RESET Key. ○ 6 N703 Module ON/OFF Key.
Neo_N703 WCDMA ModuleDemo Board User Guide Then you can Starting the N703 Demo Board with next 4 Step on your computer: Step 1 T urn on the DC 5V power supply switch. The LED indicator of the N703 Demo board is on. Step 2 Short press on the On/Off button. The N703 demo board is started. Step 3 Installing PL2303 Driver Guide on PC Step 4 Installing Modulation Modem 3.2 Installing PL2303 Driver Guide on PC Install the PL2303 driver on the computer.
Neo_N703 WCDMA ModuleDemo Board User Guide Step 4 In Device Manager, check the ports. You can see the USB-to-Serial in the list. Copyright © Neoway Technology Co.
Neo_N703 WCDMA ModuleDemo Board User Guide 3.3 Installing Modulation Modem Step 1 Click Start > Control Panel. Step 2 In Control Panel, click Phone and Modem. The Phone and Modem dialog box is displayed. Copyright © Neoway Technology Co.
Neo_N703 WCDMA ModuleDemo Board User Guide Step 3 On the Modems tab of Phone and Modem, click Add. Copyright © Neoway Technology Co.
Neo_N703 WCDMA ModuleDemo Board User Guide Step 4 In the Add Hardware Wizard, select Don’t detect my modem; I will select it from a list and click Next. Step 5 Select the Standard 33600bps Modem and click Next. Copyright © Neoway Technology Co.
Neo_N703 WCDMA ModuleDemo Board User Guide Step 6 ClickSelected ports, select the correct port, and click Next. Step 7 Click Finish. The modem is installed successfully. Copyright © Neoway Technology Co.
Neo_N703 WCDMA ModuleDemo Board User Guide Step 8 In the following dialog box, select current port and click Properties. Step 9 On the Advanced tab, add at+cgdcont=1,"ip","cmnet" to Extra initialization commands:. Copyright © Neoway Technology Co.
Neo_N703 WCDMA ModuleDemo Board User Guide Step 10 Click Change Default Preferences and set the Flow control to None. Click OK. The modem setting is completed. 3.4 Setting Up a New Connection Step 1 Right-clickNetwork and choose Properties from the pop-up menu. Step 2 In the Network and Sharing Center, click Set up a new connection or network. Copyright © Neoway Technology Co.
Neo_N703 WCDMA ModuleDemo Board User Guide Step 3 On the Choose a connection optionpage, select Set up a dial-up connectionand click Next. Copyright © Neoway Technology Co.
Neo_N703 WCDMA ModuleDemo Board User Guide Step 4 In the following dialog box, fill information as shown and click Connect. If the following page is displayed after you click Connect, dial-up connection is set up successfully. Copyright © Neoway Technology Co.
Neo_N703 WCDMA ModuleDemo Board User Guide Step 5 On the Set Network Location page, select your location. You can browse the internet now. 4 Safety Information Read the safety information carefully to ensure the correct and safe use of your wireless device. 4.1 Interference Do not use your wireless device if using the device is prohibited or when it causes danger or interference with electric devices. 4.
Neo_N703 WCDMA ModuleDemo Board User Guide Gas station. Fuel depot (such as the bunk belw the deck of a ship). Container/Vehicle for storing or transporting fuels or chemical products. Ares where air contains chemical substances and particles (such as granule,dust,or metal powder). Area indicated with the “Explosives” sign. Area indicated with the “Power off bi-direction wireless equipment” sign. Area where you are generally suggested to stop the engine of a vehicle.