Neo_GM650 User Manual Version V1.0 Shenzhen Neoway Technology Co.
Neo_GM650 User Manual V1.0 Copyright Statement Copyright © 2008 Neoway Technology All rights reserved by Shenzhen Neoway Technology Co.,Ltd. The trademark belongs to Shenzhen Neoway Technology Co.,Ltd. Other trademarks in this manual belongs to their owners. Clarification This specification is for system engineer, research engineer and test engineer.
Neo_GM650 User Manual V1.0 Contents 1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 Figuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 Character. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 Pin Definition & Encapsulation . . . . . . . . . . . . .
Neo_GM650 User Manual V1.0 Revision Record Version Content Revised Effective date V1.0 Initial version 2012-06 All rights reserved by Shenzhen Neoway Technology Co.
Neo_GM650 User Manual V1.0 1 Overview GM650 is an open platform that supports GSM/GPRS+GPS wireless industry module, reserved CPU resources and a wealth of hardware interface which is widely used in various industrial and commercial fields to provide high quality voice, message, data business, GPS Location and other functions. GM650 provide two kinds of GPS data interface mode: single-port and dual-port.
Neo_GM650 User Manual V1.0 3 Block Diagram PA RF Section GSM Baseband Controller GPS Section Application Interface Flash Audio Section Power Manager SIM x 2 LCD UART x 2 I2C MMC USB ADC/PW 4 Character Table 4-1 General parameters Operating temperature Description -30℃~+70℃ Operating voltage 3.5V~4.3V(recommendation Operating Current See table 4-2 and 4-3 Storage temperature Humidity range 3.
Neo_GM650 User Manual SMS V1.
Neo_GM650 User Manual GPS data updating V1.0 2HZ frequency Height limit 18288m Speed limit 515 m/s or 1854Km/h Acceleration limit Average working current <4g < 38mA (tracking mode) Average working current < 45mA (getting posotion) Note: The starting time, working current and other parameters of GPS is related to testing environment, including whether is under open sky, the thickness of the clouds and so on. All rights reserved by Shenzhen Neoway Technology Co.
Neo_GM650 User Manual V1.0 5 Pin Definition & Encapsulation 5.1 Pin Definition The signal connection uses 74pin SMD pad of stamp hole(half hole). Note: GM650 module IO interface level is 2.8V. Because the module IO uses 2.8V power supply system, the maximum input voltage of all the IO interface can not exceed the maximum 3.3V, otherwise it may damage the module IO. Considering the signal integrality designing reasons,while the external circuit use 3.
Neo_GM650 User Manual V1.0 8 Reserved DO PWM output 9 GND PWR Ground 10 Reserved Reserved 11 Reserved Reserved 12 VCCIO AO 2.8V output Can be supplied to IO level shift circuit,loading capacity<50mA 13 VRTC PWR RTC power 2.8V,the highest output current is 2mA 14 BACK_LIGH T DO working station indicator,output square signal of 0.5S high level,1.5Slow level High level light LED , need to parallel connect a capacitor of 0.
Neo_GM650 User Manual Reserved 40 V1.0 Reserved 41 Reserved Reserved 42 Reserved Reserved 43 Reserved Reserved 44 45 GND Reserved 46 Reserved Reserved 47 Reserved Reserved 48 Reserved Reserved 49 VSIM1 PWR Ground Reserved PWR Power of SIM card 1 50 SIM1_CLK DO Clock of SIM card 1 51 SIM1_RST DO SIM card 1 reset 52 SIM1_DATA DIO Data input&output SIM card 1 53 GND PWR Ground 54 MICP AI 55 MICN 56 Compatible to 1.8/3.
Neo_GM650 User Manual GND 73 PWR 74 ANT_GPS I/O V1.0 Ground GPS antenna interface RF 5.2 PCB Packaging The signal connection use 74pin SMD pad.The pin is stamp hole(half hole).The pitch is 1.27mm.The PCB encapsulation we recommend is as chart 5-1.Unit:mm Chart 5-1 Recommend PCB packaging(topview) Note:The number in the brackets stand for coordinate figure of the pad.The original point is All rights reserved by Shenzhen Neoway Technology Co.
Neo_GM650 User Manual V1.0 the center of the mudule. The number below the coordinate figure stand for shape size of the pad’s LxW. The top right corner and the bottom right corner is two circle regions(R=1.3).The circle regions are route keep out regions.
Neo_GM650 User Manual V1.0 using the SMT way to perform the furnace welding, in the process of production and use of the costumer, we employ the way of damp-proof packing, such as Aluminum Foil Bag, desiccating agent, Humidity Indicator Cards, Suck plastic trays, and vacuolization. As a result the product is kept dry and its life span will be long. In order to make the SMT way easy, we use the tray to load the product. The user only needs to install it in the chip mounter according to the fixed direction.