User’s GXR-8004 User’s Reader Manual Shenzhen Nation RFID Technologe Co，Ltd 1 Manual
User’s Welcome you to be the user of Nation RFID products！ 2 Manual
User’s Manual Content 1 2 Product Overview.......................................................................................................................... 5 1.1 Product characteristics......................................................................................................5 1.2 Main uses and scope of application............................................................................. 5 1.3 environment condition..............................................................
User’s Manual Safety Instructions Your safety is extremely important. Read and follow all warnings and cautions in this document before handling and operating Invengo equipment. You can be seriously injured, and equipment and data can be damaged if you do not follow the cautions. Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
User’s 1 Manual Product Overview 1.1 Product characteristics GXR-8004 Reader is a high-performance RFID module designed and developed by Nation RFID. It is equipped with four TNC antenna interfaces. It has the leading reception sensitivity in the industry. The single tag recognition rate is fast, and the multi-tag processing ability is strong.
User’s 1.4 Shape size Product size： 215mm x 114.5mm x 37.5mm Product weight：1.
User’s 2 Manual Demo Operational instructions 2.1 About Demo Software The Demo software is used to set system parameters and perform write/read operation on Nation RFID RF-M6004 series reader and ISO compliant transponders 2.2 Demo System Requirements ● Supported Operating Systems Windows Server 2003; Windows XP Service Pack 2; Windows Vista; Windows 7 ; Windows 10 These systems are 64-bit operating system. The USB driver does not support 64- bit OS for the time being..
User’s 2.4 2.4.1 Manual Demonstration software operation Connect Reader All functions can be operated only after successful connection. 2.4.1.1 Serial Communication Connection Double-click on the icon to start Demo software. Each icon in the main interface toolbar is gray to indicate that the reader is not connected yet.
User’s Manual Figure 2： RS232 Successful connection 2.4.2 Data display area Click on the button，The data display area will be displayed, as shown in Figure 3.
User’s Manual Type：Label type：6C、6B、GB Three kinds； EPC：EPC Data of Labels； TID：TID Data of Labels； UserData：User data area； ReserveData：Reserved area data, label password data, etc； TotalCount：Total number of tag reads； ANT1：Number of Reads of Antenna No.1； ANT2：Number of Reads of Antenna No.2； ANT3：Number of Reads of Antenna No.3； ANT4：Number of Reads of Antenna No.4； ANT5：Number of Reads of Antenna No.5； ANT6：Number of Reads of Antenna No.6； ANT7：Number of Reads of Antenna No.
User’s Manual 2.4.2.3 STOP Click 2.4.3 onthe button，Stop the current card reading operation. Write data 2.4.3.1 Write EPC data Select“Write Card”- > Click the button to pop up the dialog box in the main interface，As shown in Figure 4： Figure 4： Write EPC data Select a label data that has been read(Data contains TID information)，Fill in EPC data (hexadecimal string) ，Click “Confirm”. 2.4.3.
User’s Manual Figure 5: Write user data Select a label data that has been read (data contains TID information), fill in user data (16-digit string), and click“Confirm”.
User’s 2.4.4 Manual Equipment configuration The Demo main interface chooses“Device Control”->“Device Configuration” and pops up the“Device Configuration”dialog box, as shown in Figure 6. Figure 6： Equipment configuration The upper left of the window is the serial port parameters. As shown in Figure 7, click “ Get ” to get the serial port communication baud rate parameters of the reader, and click“Set”to set the serial port communication baud rate of the reader.
User’s Manual Figure 7： Serial port parameters 2.4.5 EPC baseband parameters The upper left of the window is the EPC baseband parameters. As shown in Figure 8, click“Get”to get the EPC baseband parameters of the reader and writer. Click“Set”to set reader EPC baseband parameters.
User’s Manual Changing the configuration of baseband parameters can change the actual effect of reading and writing (it can be reasonably configured according to the application scenario, but it needs to be operated under the guidance of our engineers). EPC baseband rate provides six choices: Tair = 25us, FM0, LHF = 40KHz; intensive reading mode; Tair = 25us, Miller 4, LHF = 300KHz; Fast read mode; Tari = 25us, Miller 4, LHF = 320KHz; 255/AUTO. Session offers four options： 0；1；2；3.
User’s Manual 2.4.6 Antenna Port Power Configuration The antenna power is at the bottom left of the window. As shown in Figure 9, the reader antenna power can be obtained by clicking“Get”. Click“Set” to set the reader antenna power. Figure 9： Antenna Port Power Configuration Check the corresponding antenna port (the external antenna has been connected), select the corresponding power value from the list of power values, click Settings, and pop up the prompt box for successful configuration. 2.4.
User’s determine。if you want to select the full frequency hopping, click“ Manual ” , then click on the right side. The list box shows all the frequencies in this band. Click“Set”to see Figure 12. If you click“ ”on the right list box, all frequencies will be cleared.
User’s Figure 12： Manual Frequency point selection 2.4.8 Equipment Information The main interface chooses “Tool” - >“ ”Device Information， as shown in Figure 13. After clicking on the icon, a “Device Info”pop-up window appears, as shown in Figure 14.
User’s Figure 14： Equipment Information Bullet Window 19 Manual
User’s 3 Manual Packaging and Storage 3.1 Packaging In order to facilitate storage and transportation in the future, the GXR-8004 Reader is opened and the packaging box and materials are properly preserved. In addition to the module, the package also includes the accessories needed for the use of the product. Please confirm whether the products and accessories are complete according to the product packing list.
User’s 4 Manual Services and Support Shenzhen Nation RFID Technologe Co，Ltd Advising customers Our aim is to provide customers with high quality products, follow-up will continue to optimize and update our products to ensure that our product performance is in the forefront of similar products. This user manual will be different from the actual equipment in terms of product characteristics, composition and design. We will provide corrections in time.
User’s Manual Warranty Notes： In order to provide better service, our company randomly attaches a warranty card, please keep it well, in order to enjoy the proper service. 1、Since the date of purchase, the product has not been dismantled and repaired in normal operation, and enjoys warranty service within one year.
