User Manual

ManualsBrandsShenzhen Na Yin Technology ManualsElectronicsMINI6

User Manual

MINI6

Welcome to use the bluetooth headset designed by NAYIN Science and Technology Co., Ltd.. It adopts bluetooth

version 4.1 and acoustic echo cancellers to provide you with high-quality music. Before using this product, please

read this Manual in detail.

Function Operation Voice prompt

Starting up Long press the multifunction key for

3s when the device is off

Starting up

Shutdown Long press the multifunction key for

3.5s when the device is on

Shutdown

Access to pairing

mode

Long press the multifunction key for

6.5s when the device is off

In pairing mode

Access to pairing

mode

Short press the multifunction key once

at incoming call

Caller ID Read out phone number

Hanging up Short press the multifunction key once

at call

Call end

Reject a call Long press the multifunction key for

2s at incoming call

Reject a call

Re-dial the last

number

Double-click the multifunction key

once at stand by status

Automatic redial

Interrupt dialing Short press the multifunction key once

at dialing

Voice dialing Long press the multifunction key for

2s at stand by status

Microphone mute

switch

Double-click the multifunction key

once at call

Turn on/off silent mode

Pause, play Short press the multifunction key

Volume + and volume

-/PREV/NEXT

Short press the volume + - key (long

press PREV/NEXT)

Max. volume

Supplementary instruction

1. Photograph function: The headset can take photos by double clicking volume + while used on a mobile phone with

iPhone system or most Android systems (note: For some models of mobile phones, you need to set the volume + as

for photograph function in camera setting). If the mobile phone with Android system fails to take photos, please

download headset 360 APP software, install it in you phone and set volume + as for photograph function.

2. Keyboard input: To make the headset being capable of taking photos directly, set the headset as an HID

(man-machine interface) external device of the mobile phone. When you need to type in, please double click the

volume – to popup the soft keyboard of the mobile phone;

Summary of content (7 pages)

PAGE 1
User Manual MINI6 Welcome to use the bluetooth headset designed by NAYIN Science and Technology Co., Ltd.. It adopts bluetooth version 4.1 and acoustic echo cancellers to provide you with high-quality music. Before using this product, please read this Manual in detail.
PAGE 2
3. Voice prompt switch in both Chinese and English：In standby mode, at the same time holding down the volume + and volume - button for 2 seconds, after hearing prompt release can switch in Chinese or English 4. headset MODE: The default mode of headset is headset + selfie and the keyboard symbol is shown on the mobile phone. If the revision of the mobile phone is too low or old feature phones, you may fail to connect the headset.
PAGE 3
Steps to connect the bluetooth headset to mobile phone 1.Long press the multifunction key (about 6.5s) when the headset is off until the red light and blue light of the headset flashes alternately and enters the status being searched. (After hearing the prompt "get access to pairing mode", it can be searched by other bluetooth device). 2.Turn on the bluetooth of the mobile phone. Click to search for bluetooth device until the mobile phone detects the signal of the headset.
PAGE 4
Make sure to use the headset around the mobile phone. Bluetooth scope of work between your phone and headset line without blocking up to 10 meters. Beyond this distance, it may cause quality decreasing or disconnection. Know how to re-connect 1.After hearing the voice prompt of "Connection interrupted", please put the headset close to the mobile phone. It will try to get re-connected within one min.. 2.
PAGE 5
Notes: The battery shall be charged for about 30min when it completely runs out of power, then the red lamp goes on. Long pressing means to hold the multifunction key and not to release the key. II.
PAGE 6
VI.
PAGE 7
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.