Instruction Manual

Light Up Logo Speaker
w/ Wireless Charging
Powerbank
Instruction Manual: 7197-29
1 x Bluetooth Speaker (7197-29)
1 x USB to 2Amp Micro-USB Charging Cable
1 x Instruction Manual
Playing Time: up to 7hrs at max volume
Charge Time: 2hrs (from 0-100%)
Pairing Name: Light Up Speaker
Battery: 2000mAh
Micro-USB Input: 5V/2A
USB Output: 5V/2A
Wireless Output: 5V/1A 5W
(Be sure to fully charge the speaker before
using for the rst time).
Charging the Speaker:
Connect the provided charging cable to a
power source and to the micro USB port(8)
on the speaker.
The Powerbank LED indicator (7) will ash
RED when charging, and will turn solid RED
when fully charged.
Bluetooth® Setup:
Press and hold ON/OFF Button(4)
to turn ON the speaker, Bluetooth LED
indicator(3) will ash BLUE when in
bluetooth standby mode.
Turn on the Bluetooth function on
mobile device, Select Light Up Speaker
pairing name. LED will turn solid BLUE if
successfully paired.
Speaker will automatically pair if the mobile
device has been paired before.
Press and hold ON/OFF Button(4) to turn off
the device.
Using the Speaker:
Press the ON/OFF Button(4) button to
pause music and again to play.
When receiving a phone call, press the ON/
OFF Button(4) button to answer and again
to hang up.
Long press to reject the call.
Double press to redial the last call.
Charging mobile phones and other
electronic devices:
Connect the charging cable to your mobile
phone/device using the appropriate
connector.
Connect the USB A Part of the cable into the
USB Output(9), Powerbank LED Indicator(7)
will turn RED when charging.
WARNING-When using this product, basic
precautions should always be followed:
Read all the instructions before use.
Never store or use this product in
temperatures below 32°F (0°C) or above
115°F (45°C).
Do not overcharge Phone. Unit may get
hot with excessive use. Remove Phone
when it is fully charged. Never charge for
more than 7 hours at a time.
The unit’s full performance is achieved
only after 2 or 3 completed charge and
discharge cycles.
Keep out of reach of children.
Do not use the device in excess of its
output rating. Overload outputs above
rating may result in a risk of re or injury.
•
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
7.
8.
9.
•
•
•
•
•
•
•.
1.
•
•
2.
•
•
•
•
3.
•
•
•
•
4.
•
•
Wireless Charging Surface
Light-up panel
Bluetooth LED indicator
ON/OFF Button
Wireless Charging LED
Wireless Charging Button
Powerbank LED indicator
Micro-USB Input
USB Output
What’s included:
Functions:
Tech Specications
Instructions:
SAFETY PRECAUTIONS:
MADE IN CHINA
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
This device may not cause harmful
interference, and
This device must accept any interference
received, including interference that may
cause undesired operation.
Warning:
Changes or modications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.
(1)
(2)
*
FCC Statement:
Do not use the device if damaged or
modied.
Damaged or modied batteries may exhibit
unpredictable behavior resulting in re,
explosion or risk of injury.
Do not disassemble the device. For
repairs, seek a qualied service
professional. Incorrect reassembly may
result in a risk of re or injury.
Do not expose the device to re or
temperatures above 104°F may cause
explosion.
Ensure that qualied service professionals
use only identical replacement parts to
ensure product safety.
Attachments on the back of your phone
can impede the effectiveness of the
wireless charger, and lead to overheating.
Please remove attachments from the
phone before charging on this device.
7.
8.
9.
10.
11.
12.
Remove the USB cable from your mobile
device when it is fully charged.
Wireless Charging Function:
Press the Wireless Charging Button(6)
to turn on the wireless charging function.
The Wireless Charging LED(5) will glow
GREEN.
Place the wireless charging supported
device on the Wireless Charging Surface,
LED(5) will glow RED when device is
charging.
Long press the Wireless Charging
Button(6) to turn off Wireless Charging.
** Note: If the Wireless Charging LED is
ashing an unknown object is being detect-
ed between the wireless charging surface
and the phone by FOD(Foreign Object
Detection). The device will not begin to
charge until object is removed.**
•
5.
•
•
•