Instruction Manual

Swift Universal 10000 mAh
Wireless Power Bank
Instruction Manual
7121-63
1 x 10000 mAh Power Bank
1 x Instruction Manual
Micro Input: 5V 2A
2-in-1 Output: 5V 2A
Type C Output: 5V 2A
Wireless Input: 5V 0.8A
Wireless Output: 5V 1A
ON/OFF Button: Press once to view the
remaining power capacity.
LED indicator will show Green once the
Power bank is on wireless charging standby
mode.
Charging the power bank:
Charge the power bank fully before usage.
I
nsert the USB A input
(7)
AC adapter or USB port of a computer, the
charge will begin.
charging, and will stop once fully charged.
To Wireless Charge the power bank, place
the power bank(8) on a wireless charging pad
/surface,
charging and will stop once fully charged.
Charging mobile phones and other
electronic devices:
Connect the 2-in-1 Output(5) or Type C
Output(4) to your electronic device, it
would be charged
Android device: The tip with pins upwards;
iOS device: The tip without pins upwards.
automatically.
Remove the USB cable from your mobile
device when it is fully charged.
Charging Mobile phones and other
electronic devices with wireless output.
Place wireless charging enable device on
Wireless Charging surface(3). The device will
begin to charge with LED indicator will turn
RED.
Note: In order to charge devices, use only
the accessory cable or the cable included
with your own device by the manufacturer.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
This device may not cause harmful
interference, and
This device must accept any interference
received, including interference that may
cause undesired operation.
Warning:
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.
can impede the effectiveness of the
wireless charger, and lead to overheating.
Please remove attachments from the phone
before charging on this device.
1.
a.
b.
c.
d.
2.
a.
b.
3.
a.
*
(1)
(2)
*
•
•
•
•
•
•
•
What’s included:
Features:
LED Indicators:
Instructions:
F
CC Statement:
1.
2.
3.
4.
5.
6.
7.
8.
ON/OFF button
LED Indicator
Wireless Output Pad
Type C Output
2-in-1 Output
Micro-USB Input
USB A Input
Wireless Input Pad
MADE IN CHINA
WARNING-When using this product, basic
precautions should always be followed:
Read all the instructions before use.
Never store or use this product in
temperatures below 32°F (0°C) or above
115°F (45°C).
Do not overcharge your phone. The
unit may become hot under excessive
use. Remove your phone once it is fully
charged. Never charge your phone for
more than 7 hours at a time.
The unit will only achieve full performance
after 2 or 3 completed charge and
discharge cycles.
To reduce the risk of injury, close
supervision is required when the product is
used near children.
Do not expose the device to moisture.
Do not use the device in excess of its
output rating. Overload outputs above the
Do not use the device if damaged or
explosion or risk of injury.
Do not disassemble the device. For
professional. Incorrect reassembly may
or temperatures above 104°F (40°C) may
result in explosion.
To ensure product safety, ensure that
identical replacement parts.
Attachments on the back of your phone
•
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
SAFETY PRECAUTIONS: