Instruction Manual

1.
•
•
•
•
2.
•
•
•
3.
•
**
MADE IN CHINA
INSTRUCTIONS:
Charging the PowerBank:
Charge the powerbank fully before usage.
Connect the provided charging cable to a
power source and to the Type-C Input port
(2) or Lightning Input(3) on the powerbank.
Once connected the LED Indicator(4)will begin
to flash white when cahrging.
Once fully charged LED will stop flashing.
Charging Electronic Devices with the
Power Bank:
Connect the charging cable to your mobile
phone/device using the appropriate
connector.
Connect the Type-C part of the cable to
Type-C Output(2), the LED Indicator will
illuminate when charging.
Remove the charging cable from your
mobile device when fully charged.
Charging Electronic Devices with the
Wireless Charging:
Press Powerbank ON/OFF button(1)
LED indicator will show Green once the
powerbank is in wireless charging standby
mode.
Place wireless charging enable device on
Wireless Charging Pad(5). The device will
begin to charge, LED indicator will turn
RED when charging.
an unknown object is being detected
between the wireless charging pad and the
phone by FOD(Foreign Object Detection).
(The device will not begin to charge until
object is removed.)
Magnetic wireless
power bank
Instruction Manual
MSL-M2020Q
1 x 5,000 mAh Wireless Power Bank
1 x Type-C to Type-C charging cable
1 x Instruction Manual
5000mAh/3.7V/18.5Wh
Lightning Input: DC 5V/1.5A
Type-C Input/Output: DC 5V/1.5A
Wireless Output: 5W
Press the Powerbank ON/OFF Button(1)
once to view the remaining power capacity.
Press the button twice to turn OFF.
1.
2.
3.
4.
5.
6.
•
•
•
•
•
•
Powerbank ON/OFF Button
Type-C Input/Output
Lightning Input
LED Indicator
Wireless Charging Surface
Magnet Ring
What’s included:
Features:
LED Indicators
Please remove attachments from the phone
before charging on this device.
WARNING-When using this product, basic
precautions should always be followed:
Read all the instructions before use.
Never store or use this product in
temperatures below 32°F (0°C) or above
115°F (45°C).
Do not overcharge your phone. The
unit may become hot under excessive
use. Remove your phone once it is fully
charged. Never charge your phone for
more than 7 hours at a time.
The unit will only achieve full performance
after 2 or 3 completed charge and
discharge cycles.
To reduce the risk of injury, close
supervision is required when the product is
used near children.
Do not expose the device to moisture.
Do not use the device in excess of its
output rating. Overload outputs above the
Do not use the device if damaged or
explosion or risk of injury.
Do not disassemble the device. For
professional. Incorrect reassembly may
or temperatures above 104°F (40°C) may
result in explosion.
To ensure product safety, ensure that
identical replacement parts.
Attachments on the back of your phone
can impede the effectiveness of the
wireless charger, and lead to overheating.
•
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
SAFETY PRECAUTIONS:
•
1
2
3
4
5
6