Instruction Manual

Budget Bump Bluetooth
Speaker
Instruction Manual
1 x Budget Bump Bluetooth Speaker
1 x USB to Micro-USB charging cable
1 x 3.5 mm Audio Cable
1 x Instruction Manual
Output Power: 3W
Frequency Response: 150Hz-16kHz
Driver: 45mm
Power Supply: USB, DC 5V 200mA
Battery Capacity: 350mAh
Playback time (max vol): 2 Hours
Battery Charging Time: 1.5-2 hours
Charging the Speaker: before using the
speaker for the first time charge it for at least
2-4 hours.
Plug the Micro-USB cable into the input port
of the speaker.
Plug the opposite USB end into the USB port
of a computer or compatible AC wall adapter.
The red LED turns on to indicate that the unit
is charging.
Once fully charged, the red LED turns o.
Pairing the Device:
Place speaker within 30ft of the Bluetooth
enabled device.
Slide the ON/OFF button to ON. The blue LED
flashes 3 times slowly, then flashes quickly to
Please note the following precautions
before initial use. Failure to comply may be
dangerous and cause damage to your mobile
devices.
Charge the speaker fully before initial use.
Using an incorrect AC power adapter, adapter
tip or USB cable can cause damage to both
your mobile devices and the headphones.
Always recharge the headphones in a well-
ventilated area. Do not leave the speaker in
hot or cold places.
Do not immerse the speaker in water or
expose it to moisture or weather conditions.
Do not drop, knock, or shake the speaker.
Rough handling can damage the internal
precision component and its boards.
Keep the speaker away from children, this
device is not a toy.
While charging, the speaker casing may
become warm, which is normal as the
charging and discharging processes generate
heat.
Keep the speaker away from fire or other
sou
rces of heat. Exposing the
speaker to high temperatures may cause it
to explode.
Do not short-circuit the speaker, as this may
cause damage to the unit.
Unauthorized changed or modifications may
void your right to use this product.
indicate Bluetooth pairing mode.
Follow the instructions of your device to
search for the speaker.
The speaker is called “Budget Bump” If a PIN
is required, enter “0000.”
Three tones will sound an the blue LED flashes
slowly when pairing is complete.
Basic instructions
To turn the speaker on, slide the ON/OFF
button to ON.
The speaker beeps and a blue LED flashes
slowly.
The blue LED stays on when playing music.
To turn speaker o, slide the ON/OFF button
to OFF.
LED indicator
Charging: Red LED on
Fully Charged: Red LED o
Pairing Mode: Blue LED flashes quickly
Connected: Blue LED flashes slowly
1.
a.
b.
c.
2.
a.
b.
•
•
•
•
•
•
•
•
•
•
•
•
c.
d.
e.
3.
•
•
•
•
4.
-
-
-
-
1.
2.
3.
4.
•
•
•
•
•
•
•
Micro USB
LED Red/Blue
3.5mm Audio
Input (line-in)
Power ON/OFF
What’s included:
Tech Specifications
Button Control
Instructions:
SAFETY PRECAUTIONS:
MADE IN CHINA
4
3
1
2
10/31/16 12:50 PM
Model No.:XJ0811