Modle: MS007 Focus on Intelligent lighting Super compact antenna Tri-level dimming 5.8GHz microwave motion sensor MS007(Front DIP switch) MS007B(Back DIP switch) ON Sensitivity 1 100% OFF 50% Hold Time 5s 90s 5min 10min 2 DaylightSensor 3 Disable 50Lux 25Lux 10Lux 4 5 Stand-by period 0s 10s 15min +∞ 6 7 MS007R(Remote control) Stand-by dimming level 8 20% 30% Shenzhen Mosentek Technology Co.,Ltd. Add: Building No. A, Floor 9, Shanmen community No.
Modle: MS007 Focus on Intelligent lighting Features Linear configulation antenna (only 11mm width), suitable for build in linear lighting fixture Tri-level dimming control Daul-PD technology, automatic lux on and lux off function 3 types structures for selection: front side DIP switch:MS007; back side: MS007B; remote control: MS007R 5 years warranty Technical data Input Output Sensor Parameters Other Operating voltage 12VDC Operating current 40mA Stand-by power ≤0.
Modle: MS007 Focus on Intelligent lighting Mechanical structure MS007 Front side DIP Switch Daylight sensor Antenna module Installation hole MS007B Back side DIP MS007R Remote control Switch Installation hole Daylight sensor IR Receiver Antenna module Dimension (Unit: mm) MS007 Front side DIP 112.5 107.5 101 64 5 ø2.5 11.3 19 10.5 ø2.5 22.8 4.2 10 3.7 34.5 MS007B Back side DIP MS007R Remote control 112.5 107.5 101 101 23 10.5 22.8 34.5 ø2.5 4.3 64 11.3 19 ø5.5 ø2.5 3.
Modle: MS007 L L N N VCC VCC DIM OUT GND GND Focus on Intelligent lighting Sensor LED Driver LED+ LED- Settings ON 1 Hold-time DIP switch Sensitivity 1 2 2 3 4 5 6 7 Daylight threshold 3 DIP switch 5s Disable 4 5 8 OFF Stand-by period DIP switch 6 7 0s Stand-by dimming level 90s 50Lux 10s 100% 5min 25Lux 15min 20% 50% 10min 10Lux +∞ 30% DIP switch In this area, movement will be detected and able to trigger the sensor.
Modle: MS007 Focus on Intelligent lighting Daylight Priority Thanks for the Dual-PD technology, The sensor can tell the difference between natural light and artificial LED light, the sensor will turn on your light fixtures when the ambient light is lower than the setting value even there is no any motion was detected. When the ambient light is up to the setting value, the sensor will switch off the light fixtures even there is still motion.
Modle: MS007 Focus on Intelligent lighting ON/OFF function The daylight threshold is set to "10Lux/25Lux/50Lux, Stand-by period is set to "0s". With sufficient daylight, even when motion detected, light remains OFF. With insufficient ambient brightness, light dims to 100% when motion was detected . Light keeps on 100% within the holdtime. After the last detection and the preset hold time elapsed, light OFF. The daylight threshold is set to "Disable".
Modle: MS007 Focus on Intelligent lighting Application Train station, Airport, etc. Industrial Lighting: Factory, Warehouse, etc. Commercial Ligtihng: Office, Supermarket, etc. Public Lighting: Residence, Hospital, School, Metro station Corridor Warehouse Parking Installation precautions Wiring must be strictly in accordance with the wiring diagram to avoid short circuit. The detected surface cannot be shielded by metal objects.
Caution: This device complies with Part 15 of the FCC rules and Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment.