User's Manual

ManualsBrandsSHENZHEN MIZAR TECHNOLOGY ManualsElectronicsBLE Anti-Lost Alarm

USER MANUAL

Bluetooth Anti-Lost Alarm

Model: MA-599

FCC ID: 2ABZRMA599

Manufacturer: SHENZHEN MIZAR TECHNOLOGY CO.,LTD.

Address: 3F, Building B, NO.34 Gongyuan Road, jiabao Block 22, Bao an District, Shenzhen,

China

Please confirm details below before operation：

1. Your iPhone/iPad is iPhone4S/5, iPad 4

, New iPad, iPad Mini.

2. Your iPhone/iPad and system is iOS6.1 or above.

3. The Bluetooth function of Your iPhone/iPad is activated.

4. You can enter App Store, with network (GPRS, 3G, Wifi)and has your Apple ID.

Overview：

How to use：

1. Search BLE Anti-lost in App Store and install it on your iPhone4S/5/iPad4/3/Mini.

Pairing

button

Pairing

indicator

Summary of content (5 pages)

PAGE 1
USER MANUAL Bluetooth Anti-Lost Alarm Model: MA-599 FCC ID: 2ABZRMA599 Manufacturer: SHENZHEN MIZAR TECHNOLOGY CO.,LTD. Address: 3F, Building B, NO.34 Gongyuan Road, jiabao Block 22, Bao an District, Shenzhen, China Please confirm details below before operation： 1. Your iPhone/iPad is iPhone4S/5, iPad 4th, New iPad, iPad Mini. 2. Your iPhone/iPad and system is iOS6.1 or above. 3. The Bluetooth function of Your iPhone/iPad is activated. 4.
PAGE 2
. Make sure the Bluetooth function on your phone has been activated，then open the APP you just downloaded in Step 1. 3. Long press pairing button until the LED light flashes in red and blue colors, then the device goes into pairing mode。 4. Click “Activate” button in the APP, then the APP will be connected with your cellphone，and LED light turns off.
PAGE 3
5. You can change the device name/picture ,signal strength（effective distance），and warning tone. Then goes into working mode once setting done. 6. When the distance between the device and the phone is out of range，both the phone and device will alarm to warn you the connection is dead, and the phone will also vibrate.
PAGE 4
7. When you put your phone back to the effective range，the phone will be connected again with the device automatically, and it indicates ''In Range'', the the alarm done。 8. Clicking“Find Device”in setting mode，device will alarm（within effective distance），very easy to find. 9. Long press the pairing button can help you find your phone（within effective range），the phone will vibrate and alarm 10. You can turn on Sleep Mode when you don’t need to use the device and click “OK”.
PAGE 5
the pairing button to re-connect, LED light flashes in red and blue, and the debvice will be connected with your phone again. 12. If long time no use，you can delete the connections from the main interface，and the device will stop and power off automatically.。 WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.