BABY MONITOR SM935E (Digital Wireless Video Baby Monitor With 3.
support@anmeate.com THANK YOU FOR PURCHASING ANMEATE BABY MONITOR. PLEASE ACTIVE AND EXTEND YOUR WARRANTY NOW. (Register within 7 days after receiving your product) To register your product Visit https://anmeate.com/warranty Finished the form on the website That is it! Your product is now active and extend warranty! If you are unsatisfied with your product, please contact us via support@anmeate.com or anmeate.com before leaving a negative review. We will definitely give you a satisfactory solution.
support@anmeate.com Congratulation! Now you can take care of your babies anywhere and anytime! Please read the user manual before use! Please retain your original dated sales receipt for your to records. For warranty service of your baby monitor, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
support@anmeate.com 1. SAFETY INSTRUCTIONS : CAUTION: Keep small parts away from children. Strangulation Hazard: Children can become entangled in cords. Power cords should be kept more than 3 feet away from the crib and baby's reach all the time. Baby monitors and cameras with power cords should never be hung on or near the crib. This product is not a toy and should be kept out of children's reach. This product contains small parts. Be care when unpacking and assembling the product.
support@anmeate.com enclosed area, such as a bookcase or drawer that may impede air flow. Keep away from sources of heat: This unit should not be exposed to direct heat sources such as a candle, replace, radiator, heat register, stove or other appliance that emits heat. The unit should not be left in direct sunlight. Power source: This unit should only be used with the adapter included in this package. Damage requiring service: This unit should be serviced by qualified personnel .
support@anmeate.com if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
support@anmeate.com television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and the receiver. - Connect the equipment into an outlet different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
support@anmeate.com 2. WARRANTY TERMS We take quality very seriously. This is why all of our products come with one year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues please contact support@anmeate.com. We will definitely give you a satisfactory solution. 3.
support@anmeate.com 4. PRODUCT OVERVIEW 4.1 What’s included: 1. Parent unit x 1 4. User manual x 1 2. Baby unit x 1 5. Wall mount shim x 1 3.
support@anmeate.com 4.2 Parent Unit (Monitor) LCD screen Power/Charging Indicator LED Brightness-/Left Volume Indicator Power on/off Volume+/Up Pan/Tilt Speaker Stand OK Mic Menu/Exit Volume-/Down Talk to Baby Brigthess+/Right Reset(under stand) DC-Jack 4.
support@anmeate.com 4.
support@anmeate.com 5. PLACEMENT OF THE BABY MONITOR Aim to provide the viewing area: Select a location for the baby unit that provides a clear view of the area you want to monitor, which is free from dust, and is not in line -of- signt to a strong light source or direct sunlight. Avoid installing the baby unit where there are thick walls or obstructions between the camera and the monitor. STRANGULATION HAZARD--keep cord out of child’s reach. Never place camera or cords within 3 feet of crib or playpen.
support@anmeate.com 6. USING THE BABY MONITOR 6.1 TURN ON THE BABY UNIT: Only use the adapter included in this package. Use the provided adapter to connect the wall outlet with the baby unit. Once the adapter connects then the unit will turn on automatically and the power LED will light up. 6.2 TURN ON THE PARENT UNIT: Only use the adapter included in this package. The parent unit is supplied with a built-in rechargeable Li-ion battery.
support@anmeate.com 7. OSD MODE OPERATION 7.1 PARENT UNIT SCREEN ON/OFF Under the boot state, short press the power key to turn on / off the screen. 7.2 VOLUME ADJUSTMENT Under the boot state, press the UP key Under the boot state, press the DOWN key to increase the volume. to decrease the volume. 7.3 BRIGHTNESS ADJUSTMENT Under the boot state, press the Left key Under the boot state, press the Right key to decrease the brightness. to increase the brightness. 7.
support@anmeate.com 7.5 CAMERA VIEW / SCAN (This function is only available when two or more cameras paired) Press OK key to view / scan camera. During scan mode, the scan icon will be displayed on the top of LCD screen and each paired camera(when more than one camera is paired) will be displayed on the screen for approx 10 seconds and then will automatically change to the next paired camera. 7.6 TALK TO BABY To talk, press and hold the talk key on the front of the monitor.
support@anmeate.com 8. MENU OPERATION 8.1 ECO SETTING This mode allows you to control the sound activation of your baby monitor. The ECO default setting is OFF. If there is no sound around the camera within 30 Seconds, it will stops transmitting. The monitor screen turns off when the camera is not transmitting. When the camera detects the sound is louder than set sensitivity level, it will start transmitting the signal to the monitor again. To change the ECO level, please follow the next instructions: 1.
support@anmeate.com 8.3 LULLABY SETTING You can soothe the baby to sleep by playing a gentle lullaby from the baby unit. 1. Press the Menu/Exit key 2. Press the LEFT key and the menu will pop up. or RIGHT key until the lullaby icon is highlighted. 3. Press UP key or DOWN key 4. Press OK key to confirm. 5. Press the Menu/Exit key to select. to Exit. 8.4 PAIRING THE CAMERA AND MONITOR 1. Press the Menu/Exit key 2. Press the LEFT key then the menu will pop up.
support@anmeate.com 8.6 Video Pan/Tilt 1.Press the shot-cut key enter into the Pan/Tilt mode. 2.Press or key to Tilt the video. 3.Press or key to Pan the video. 4.Press the shot-cut key to exit the Pan/Tilt mode. Note: During the Pan/Tilt mode can not use the navigation key to adjust Volume and brightness.
support@anmeate.com 9. TECHNICAL DATA 9.1 System General Frequency 2.4GHz FHSS Operation Environment Indoor use only; Temperature: 0-40 °C ; Humidity: 5% to 90% rh. ( relative humidity) Operating Range Up to 900 feet (straight line and open space) Power adapter Input: 100-240VAC 50 / 60Hz, 300mA Max Output: 5V, 700mA LCD 3.5'' LCD Screen Rechargeable battery for monitor Model: 503450; 3.
support@anmeate.com 10. TROUBLE SHOOTING 1. The power adapters may not be properly connected. Confirm that the camera and monitor are ON. See item 2 “Getting started”, connect the baby unit in the right way. If it is still unconnected, choose another baby unit to connect. 2. The baby unit may be too far from the parent unit. No reception on the monitor Keep the distance between the baby unit and the parent unit with 900 feet (open space). 3. The baby unit and parent unit may not be properly paired.
support@anmeate.com 1. The baby unit and parent unit may be place too close together. A high-pitched Noise is Heard Keep the distance between parent unit and the baby unit. 2. The volume on the parent unit may be set too high. Turn down the volume on the parent unit. 3. If the above strategies do not work, restart the parent unit. No Sound on the Parent Unit Image Freezes 1. Volume may be set too low. Turn up the volume on the parent unit. 2.
All rights reserved The features described in user’s manual are subject to modifications without prior notice.
Live Chat Support Learn more about ANMEATE, please visit us at https://anmeate.com Or Scan QR Code & Send to us scan me support@anmeate.com Printed in China www.anmeate.