Thanks for Choosing Kidskin) We provide 24h Professional Service Center. Lifetime Manufacturer's Technical Support. And 30 Days Money-Back Service, Ensures Long-lasting Enjoyment of Your Purchase. If you have any questions, feel free to contact us.
Congratulation! Now you can take care of your babies anywhere and anytime! Please read the user manual before use! Please retain your original dated sales receipt for your to records. Far warranty service of your baby monitor, you will need ta provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
CAUTION: Keep small parts away from children. Strangulation Hazard: Children can become entangled in cords. Power cords should be kept more than 3 feet away from the crib and baby's reach all the time. Baby monitors and cameras with power cords should never be hung on or near the crib. This product is not a toy and should be kept out of children's reach. This product contains small parts. Be care wham unpacking and assembling the product.
enclosed area, such as a bookcase or drawer that may impede air flow. Keep away from sources of heat: This unit should not be exposed to direct heat sources such as a candle, replace, radiator, heat register, stove or other appliance that emits heat. The unit should not be left in direct sunlight. Power source: This unit should only be used with the adapter Included in this package. Damage requiring serves: This unit should be serviced by qualified personnel. A WARNING: IR emitted frown this product.
if not installed and used in accordance with the instructions, may cause harmful interference to radii communications. However, there is no guarantee that interference will not occur in a particular installation, If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user Is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures: = Reorient or relocate the receiving antenna. «increase the separation between the equipment and the receiver. = Connect the equipment into an outlet different from that to which the caregiver is connected. Consult the dealer or an experienced radio/TV technician for help.
‘We take quality very seriously. This is why all of our products come with one year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues please contact We will definitely give you a satisfactory solution. To use your parent unit and baby unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions.
Aim to provide the viewing area: Select a location for the baby unit that provides a clear view of the area you want to monitor, which Is free from dust, and is not in line -of sight to a strong light source or direct sunlight. Avoid installing tha baby unit where there are thick walls or obstructions between the camera and the monitor. STRANGULATION HAZARD--keep cord out of child's reach. Never place camera or cords within 3 feet of crib or playpen.
6.1 TURN ON THE BABY UNIT: Only use tha adapter included in this package. Use the provided adapter to connect the wall outlet with the baby unit. Once the adapter connects then the unit will turn on automatically and the power LED will light up. 62 TURN ON THE PARENT UNIT: Only use the adapter included in this package. The parent unit is supplied with a built-in rechargeable Li-ion battery. We suggest connecting the monitor to the adapter plugged into the mains whenever possible te keep the battery charged.
7.1 PARENT UNIT SCREEN ON/OFF Under the boot state, short press the power key to turn on / off the screen. 7.2 VOLUME ADJUSTMENT Under the boot state, press the UP key to increase the volume. Under the boot state, press the DOWN key # to decrease the volume. 7.3 BRIGHTNESS ADJUSTMENT Under the boot state, press the Left key to decrease the brightness. Under the boot state, press the Right key to increase the brightness. Tk DIGITAL ZOOM & PAN / TILT Crass and hold Menu/Exit key around 2 secants to operate.
7.5 CAMERA VIEW / SCAN {This function is only available when two or more cameras paired} Press OK key to view / scan camera. During scan mode, the scan icon will be displayed on the top of LCD screen and each paired camera(when more than one camera is paired) will be displayed on the screen for approx 10 seconds and then will automatically change to the next paired camera. 7.8 TALK TO BABY To talk, press and hold the talk key on the front of the monitor.
81 ECO SETTING This mode allows you to control the sound activation of your baby mentor, The ECO default setting is OFF. If there is no sound around the camera within 30 Seconds, it will stops transmitting. The monitor screen turns off when the camera is not transmitting. When the camera detects the sound is louder than set sensitivity level, it will start transmitting the signal to the monitor again. To change the ECO level, please follow the next instructions: 1.
8.3 LULLABY SETTING You can soothe the baby to sleep by playing a gentle lullaby from the baby unit. 1. Press the Menu/Exit key and the menu will pop up. 2. Press the LEFT key or RIGHT key until the lullaby icon is highlighted. 3. Press UP key or DOWN key to select. 4. Press OK key |: to confirm, 5. Press the Menu/Exit key to Exit. 8.4 PAIRING THE CAMERA AND MONITOR 1. Press the Menu/Exit key then the menu will pop up. 2.
8: Video Pan/Tilt 1.Press the shot-cut key enter into the Pan/Tilt mode. 2.Press or kay 1o Til the video. 3. Press or key to Pan the video, 4.Press the shot-cut key to exit the Pan/Tilt mode. Note: During the Pan/Tilt mode can not use the navigation key to adjust Volume and brightness.
He reception or tg monitor that'd power scepters may not be properly connected, Confirm that the canes snd ranker ars ON. Ses itn 2 “Getting started”, connect the baby wit In the right way. #1 bs steel unconnected, chaos another baby Uni ta connect, 2. Tree bale wnt vm be To far from the parent unit. Hosp the distance batsman tha baby unit and the parent unit with B30 fast Conan spaced, 3. The baby unit and parent unit ray not be properly pared.
The baize unit and parent unit may be place ton close together. Keep the distance between parent uit and the bet unit. # high-pitched . . Noise 2. Tha rehi on the parent unit may be sat bo high. Tum dwn the velum an the parent uri, 3 7 the now intermingles do not work, restart the parent unit, Volume ray be sat 150 low. Ho Sound an the “Turn ue tha volume on the parent unk, Part Uris 2 If the shove sweetness do rot work, Fa start the parent uni.
All rights reserved The features described in user's manual ara subject to modifications without prier notice.
For support and warranty, please visit Wa will respond all inquires within 24 hours. Mead Help? Scan GR Code & Serrate mall support@kidsneed top Printed in China @ wwwiidsneed.