size: 128.
service@ifamily.vip service@ifamily.
service@ifamily.
service@ifamily.vip CONTENT 1. SAFETY INSTRUCTIONS 1-2 2. PRODUCT OVERVIEW 3 2.1 Package list 3 2.2 Parent unit(monitor) 2.3 Baby unit(camera) 2.4 Icon overview 3. USING THE BABY MONITOR 4. FUNCTION OVERVIEW 4-5 6 6 7-10 11 4.1 Pairing the camera and monitor 11 4.2 Delete the camera 12 4.3 Lullaby setting 13 4.4 Feeding timer setting 14-15 4.5 Vox setting 16-17 4.6 Temperature settings 18 4.6.1 Temperature alarm setting 18 4.6.2 Temperature Hi/Lo alert limits 19 4.7 Setting 4.7.
service@ifamily.
service@ifamily.
service@ifamily.
service@ifamily.vip 1 2 3 4 5 6 7 8 9 1 Power key: Long press to turn on/o 2 Pan/Tilt 3 Volume + / Up key: Press the key the monitor; short press to screen on/o . to enter into the pan/Tilt mode. Press Volume+ to increase the volume/ To up the camera in the Pan/Tilt mode. 4 Brightness + / Right key: Press the Brightness+ to increase the brightness/ To right the camera in the Pan/Tilt mode. 5 OK: 6 Volume - / Down key: Press the OK key to view/scan camera or to con rm.
service@ifamily.vip *Bear in mind that you can't listen to your baby while you're talking to them; to listen to it, you will have to stop pressing this button. 9 Menu/Exit: Press short Menu/Exit key the menu will pop up, and press again to EXit. Press and hold the Menu/Exit key around 2 seconds to operate Zoom in/out. MIC: When talking to the baby, collect the voices of the parents. Power&Charging Indicator LED: *The LED shows red when charging under the display is turn o state.
service@ifamily.
service@ifamily.vip 3.1 CHARGING AND POWERING THE MONITOR UNIT Step1: Charge the monitor by connecting the A/C adapter included in this package to the monitor and a socket. (It takes about 4 hours for the monitor to be fully charged). Charging: Red/orange Fully charged: Green Step2: Use the provided AC adapter included in this package to connect the wall outlet with the baby unit.
service@ifamily.vip Note: *Place the camera at least 3ft / 1m away from your baby. Gently press and hold the Power Button for 3s to turn on the monitor, then you can see the live view. *Follow your needs to adjust the sound, brightness, and reasonable placement of the camera.
service@ifamily.vip Step1. Press and hold the Menu/Exit key arond 2 seconds enter Zoom mode. Step2. At the Zoom mode, press the Pan/Tilt key to adjust the direction of the camera/image. Step3. Press the LEFT key pan right; Press UP key to pan left; Press RIGHT key to tilt up; Press Down key to to tilt down. Step4. Press and hold the Menu/Exit key again around 2 seconds to operate Zoom out. During digital zoom mode, the zoom icon will be displayed on the top of screen.
service@ifamily.
service@ifamily.vip 4.FUNCTION OVERVIEW 4.1 PAIRING THE CAMERA AND MONITOR Step1: Press Menu / Exit key and the menu will pop up. MENU VOX Step2: Select the camera icon press the LEFT key and press OK key or RIGHT key to enter into sub-menu, to select the camera to be paired. Camera Step3: Press OK key to start the pairing. While the screen shows pairing then press the PAIR button 7 on the back of camera. Pairing 7 Step4: Once paired, then the screen will display the image from the camera.
service@ifamily.
service@ifamily.vip 4.3 LULLABY SETTING You can soothe the baby to sleep by playing a gentle lullaby from the baby unit. Step1: Press Menu / Exit key and the menu will pop up. MENU VOX Step2: Select the lullaby icon and press OK key to enter into sub-menu. Lullaby 1 2 3 4 5 Step3: Press the NAVIGATION key to select the lullaby you need. Step4: Press OK key to con rm. Step5: Press the Menu / Exit key to Exit.
service@ifamily.vip 4.4 FEEDING TIMER SETTING You can use the alarm to remind yourself to feed baby/change diapers/ sleep,etc Step1: Press Menu / Exit key and the menu will pop up. MENU VOX Step2: Select the alarm icon and press OK key to enter into sub-menu. Step3: Press the NAVIGATION key to select desired alert time. Step4: Press OK key to con rm. Step5: Press the Menu / Exit key to Exit. 3h 1h 2h 4h 6h Note1: Once the alarm is turned on, alarm icon will displayed on the Screen.
service@ifamily.vip alarm o . Note4: If you don’t turn o the alarm, the alarm will ring for 1 minute. After 3 minutes the alarm will ring again for 1 minute. The alarm will ring for 3 times in total, after this the alarm goes o .
service@ifamily.vip 4.5 VOX SETTING This mode allows you to control the sound activation of your baby monitor. The VOX default setting is OFF. If there is no sound around the camera within 30 Seconds, it will stop transmitting. The monitor screen turns o when the camera is not transmitting.
VOX is Low sensitivity level; the baby have to make a lot of sound before the VOX function will be activate. VOX VOX is middle sensitivity level. is High sensitivity level; the baby don’t have to make a lot of sound before the VOX function will be activate.
service@ifamily.vip 4.6 TEMPERATURE SETTINGS 4.6.1 Temperature Alarm Setting Step1: Press Menu / Exit key and the menu will pop up. MENU VOX Step2: Select the temperature icon and press OK key to enter into sub-menu. 18 38 Min Max Step3: Press the LEFT key or RIGHT key to select between ℃ or ℉, Follow up on your needs to set the maximum and minimum alarm temperatures. Step4: Press OK key to con rm. Step5: Press the Menu / Exit key to Exit.
service@ifamily.vip 4.6.2 Temperature Hi/Lo Alert Limits Step1: Press LEFT key or RIGHT key to select Max (red) or Min (green) for Hi/Lo limits settings. 18 38 Min Max Step2: Press the up key/down key to adjust the Hi limit when Max (red) is selected. Step3: Press the up key/down key to adjust the Lo limit when Min (green) is selected. Note: The high temperature alarm default setting is 31°C, and the low temperature alarm default is 14°C.
service@ifamily.vip 4.7 SETTING 4.7.1 Language Setting Step1: Press Menu / Exit key and the menu will pop up. MENU VOX Step2: Select the setting icon and press OK key sub-menu. to enter into Language Setting Step3: Select the language setting and press select the language you need and press Language Setting 日本語 русский Step4: Press the Menu / Exit key to Exit. to enter into sub-menu, to con rm.
service@ifamily.vip 4.7.2 Frequency Setting Step1: Press Menu / Exit key and the menu will pop up. MENU VOX Step2: Select the setting icon and press OK key to enter into sub-menu. Frequency Setting Step3: Select the frequency setting and press to enter into sub-menu, select the 60Hz if you are in North America, Select the 50Hz if you are in EUROPE. Frequency Setting 50Hz 60Hz Step4: Press the Menu / Exit key to Exit.
service@ifamily.vip 4.7.3 Reset Setting Step1: Press Menu / Exit key and the menu will pop up. MENU VOX Step2: Select the setting icon and press OK key to enter into sub-menu. Reset Step3: Select the reset setting and press select YES if you need to reset it.
service@ifamily.
service@ifamily.vip Product does not switch on *Con rm that the Camera and Monitor Unit are ON(check power LED indicator). *Con rm that Power adapters are properly connected. Reception Interference (static) *The camera and Monitor Unit may be too far apart. *The battery power may be too low. *Other electronic devices may be interfering with the signal. *The Camera or Monitor Unit may be in close proximity to large metallic objects causing interference. *Use of other 2.
service@ifamily.vip Picture is black and white *Night vision LED may be ON. Night vision mode operates in black and white. *Turn on room lights to force monitor out of night vision mode. The picture playback is not smooth (choppy video with low frame rate) *Try moving the Camera Unit closer to the Monitor Unit *Remove obstructions between the Camera and Monitor Unit. *Use of other 2.
service@ifamily.
service@ifamily.vip CUSTOMER SUPPORT If you encounter any problems in the process of using the product, please feel free to contact us, we will reply to you within 24 hours and resolve the issue in a way that satis es you. Customer service e-mail address: service@ifamily.
https://www.ifamily.vip/ service@ifamily.vip https: //www.ifamily.
