service@smartbaby.info service@smartbaby.
service@smartbaby.
service@smartbaby.info CONTENT 1. SAFETY INSTRUCTIONS 1-2 2. PRODUCT OVERVIEW 3 2.1 Package list 3 2.2 Parent unit(monitor) 4-5 2.3 Baby unit(camera) 6 2.4 Icons overview 6 3. USING THE BABY MONITOR 4. FUNCTION OVERVIEW 7-9 10 4.1 Lullaby setting 10 4.2 VOX setting 11 4.3 Digital zoom 12 4.4 Split screen setting 13 4.5 Pairing the camera and monitor 14 4.6 Delet the camera 4.7 Setting 5. TECHNICAL DATA 15 16-21 22 5.1 System general 22 6.
service@smartbaby.
service@smartbaby.
service@smartbaby.
service@smartbaby.info 1 2 3 4 5 6 7 8 9 1 Power key: Long press to turn on/o 2 Pan/Tilt 3 Volume + / Up key: Press the key the monitor; short press to screen on/o . to enter into the pan/Tilt mode. Press Volume+ to increase the volume/ To up the camera in the Pan/Tilt mode. 4 Brightness + / Right key: Press the Brightness+ to increase the brightness/ To right the camera in the Pan/Tilt mode. 5 OK: 6 Volume - / Down key: Press the OK key to view/scan camera or to con rm.
service@smartbaby.info *Bear in mind that you can't listen to your baby while you're talking to them; to listen to it, you will have to stop pressing this button. 9 Menu/Exit: Press short Menu/Exit key the menu will pop up, and press again to EXit. MIC: When talking to the baby, collect the voices of the parents. Power&Charging Indicator LED: *The LED shows red when charging under the display is turn o state. *The LED displays shows orange when charging under the turn on state.
service@smartbaby.
service@smartbaby.info 3.1 CHARGING AND POWERING THE MONITOR UNIT Step1: Charge the monitor by connecting the A/C adapter included in this package to the monitor and a socket. (It takes about 4 hours for the monitor to be fully charged). Charging: Red/orange Fully charged: Green Step2: Use the provided AC adapter included in this package to connect the wall outlet with the baby unit.
service@smartbaby.info Note: *Place the camera at least 3ft / 1m away from your baby. Gently press and hold the Power Button for 3s to turn on the monitor, then you can see the live view. *Follow your needs to adjust the sound, brightness, and reasonable placement of the camera.
service@smartbaby.info 10cm 3.5 SCAN AND SWITCH THE CAMERAS Short press the OK key to switch camera view when two or more cameras are connected. Long press OK key to enter scan mode, a Scan mode on icon will be displayed at the bottom left corner of the screen for 8 seconds, The camera switch icon will displayed on the top of the screen. Each camera’s video will be stay on the LCD around 18 seconds. Short press the OK key to quit the scan mode.
service@smartbaby.info 4.FUNCTION OVERVIEW 4.1 LULLABY SETTING You can soothe the baby to sleep by playing a gentle lullaby from the baby unit. Step1: Press Menu / Exit key and the menu will pop up. Step2: Select the lullaby you want to play through the NAVIGATION key and OK key . Step3: Set playback duration and volume through the NAVIGATION key and OK key . Step4: Press the Menu / Exit key to Exit.
service@smartbaby.info 4.2 VOX SETTING This mode allows you to control the sound activation of your baby monitor. The VOX default setting is OFF. If there is no sound around the camera within 30 Seconds, it will stop transmitting. The monitor screen turns o when the camera is not transmitting.
service@smartbaby.info 4.3 DIGITAL ZOOM Step1: Press the Menu / Exit key and the menu will pop up. Step2: Press UP key or DOWN key to select digital zoom setting. Step3: Set the zoom scale through the NAVIGATION key, Press OK key con rm. Step4: Press the Menu / Exit key to Exit.
service@smartbaby.info 4.4 SPLIT SCREEN SETTING Step1: Press the Menu / Exit key and the menu will pop up. Step2: Press UP key or DOWN key to select split screen setting. Step3: Choose single screen display or dual screen display through the NAVIGATION key, Press OK key to con rm. Step4: Press the Menu / Exit key to Exit. NOTE: This function is only available when two or more cameras are paired.
service@smartbaby.info 4.5 PAIRING THE CAMERA AND MONITOR Step1: Press Menu / Exit key and the menu will pop up. Step2: Press UP key or DOWN key to select pair camera setting. Select the camera to be paired through the NAVIGATION key, Press OK key or right key to to start the pairing. While the screen shows pairing then long press the PAIR button 7 on the back of camera. Once paired, then the screen will display the image from the camera. Step3: If unsuccessful, please repeat above steps.
service@smartbaby.info 4.6 DELET THE CAMERA Step1: Press Menu / Exit key and the menu will pop up. Step2: Press UP key or DOWN key to select the delete camera icon. Step3: Select YES and press ok key Step4: Press menu key to exit menu. to delete the camera.
service@smartbaby.info 4.7 SETTING 4.7.1 Temperature unit setting Step1: Press Menu / Exit key and the menu will pop up. Step2: Press UP key or DOWN key to select the setting icon. Step3: Press right key to Select , Step4: Select or , Press OK key to con rm. Step5: Press the Menu / Exit key to Exit. 4.7.2 Temperature alert setting Step1: Press Menu / Exit key and the menu will pop up. Step2: Press UP key or DOWN key to select the setting icon.
service@smartbaby.info Step3: Press right key to Select , Step4: Set the appropriate maximum and minimum temperature, Press OK key to con rm. Step5: Press the Menu / Exit key to Exit. 4.7.3 Time format setting Step1: Press Menu / Exit key and the menu will pop up. Step2: Press UP key or DOWN key to select the setting icon.
service@smartbaby.info Step3: Select the time display format and set the appropriate time, Press OK key to con rm. Step4: Press the Menu / Exit key to Exit. 4.7.4 Language setting Step1: Press Menu / Exit key and the menu will pop up. Step2: Press UP key or DOWN key to select the setting icon. Step3: Select the language, Press OK key to con rm. Step4: Press the Menu / Exit key to Exit. 4.7.5 Timer setting Step1: Press Menu / Exit key and the menu will pop up.
service@smartbaby.info Step2: Press UP key or DOWN key to select the setting icon. Step3: Select the alarm timer, Press OK key to con rm. Step4: Press the Menu / Exit key to Exit. 4.7.6 Warning alert volume setting Step1: Press Menu / Exit key and the menu will pop up. Step2: Press UP key or DOWN key to select the setting icon.
service@smartbaby.info Step3: Select the alert volume, Press OK key to con rm. Step4: Press the Menu / Exit key to Exit. 4.7.7 Frequency setting Step1: Press Menu / Exit key and the menu will pop up. Step2: Press UP key or DOWN key to select the setting icon. Step3: Select 60Hz if you are in North Ameriva, select 50Hz if you are in EUROPE. Press OK key to con rm. Step4: Press the Menu / Exit key to Exit. 4.7.8 Night vision setting Step1: Press Menu / Exit key and the menu will pop up.
service@smartbaby.info Step2: Press UP key or DOWN key to select the setting icon. Step3: Select the working status of night vision, Press OK key to con rm. Step4: Press the Menu / Exit key to Exit. The default setting is AUTO. If you choose OFF, the item will not enter the night vision mode even in darkness. If you choose ON, the item will always in the night vision mode. It will show black and white picture all the time.
service@smartbaby.
service@smartbaby.info Product does not switch on *Con rm that the Camera and Monitor Unit are ON(check power LED indicator). *Con rm that Power adapters are properly connected. Reception Interference (static) *The camera and Monitor Unit may be too far apart. *The battery power may be too low. *Other electronic devices may be interfering with the signal. *The Camera or Monitor Unit may be in close proximity to large metallic objects causing interference. *Use of other 2.
service@smartbaby.info Picture is black and white *Night vision LED may be ON. Night vision mode operates in black and white. *Turn on room lights to force monitor out of night vision mode. The picture playback is not smooth (choppy video with low frame rate) *Try moving the Camera Unit closer to the Monitor Unit *Remove obstructions between the Camera and Monitor Unit. *Use of other 2.
service@smartbaby.
service@smartbaby.info CUSTOMER SUPPORT If you encounter any problems in the process of using the product, please feel free to contact us, we will reply to you within 24 hours and resolve the issue in a way that satis es you. Customer service e-mail address: service@smartbaby.
https://www.smartbaby.info service@smartbaby.