S1 Temperature & Humidity Sensor Beacon handbook Version:V0.1 This handbook is written for using the APP BeaconSET on device based on IOS10.0(iphone device) Welcome to contact our technical department of our company if you have any questions! All Rights Reserved by Shenzhen Minew Technologoies Co., Ltd.
Important tips: 1.S1 is a kind of BLE 4.0 high accuracy digital temperature&humidity sensor product with temperature&humidity sensor,it is waterproof as well; 2.S1 can convert the environmental temperature and humidity into correspondent digital signal then broadcasts them,user can check the temperature and humidity data directly through App; 3.Parameters setting or connection is not supportable; 4.This handbook is mainly about how to acquire temperature and humidity through App; 5.
2.1 After turned on,the S1 stars broadcasting,meanwhile its blue LED flashes one time per second(the blue LED is the data indicating LED of S1) ; 2.2 Default device name :’S1’; 2.3Default temperature and humidity data broadcasting interval:1000ms; 2.4Default temperature and humidity data sampling interval:1000ms; 2.5 Default power of broadcasting:0dbm; 2.6 S1 supports over-the-air(OTA). 3 Turn on the bluetooth on your smart phone,then run the APP ‘BeaconSET’(Tts version should be above V5..0.
Image 2 4.3 The information shown in the searching interface of App includes:device name,MAC,battery level,power of broadcasting,temperature data,humidity data,RSSI and the distance between S1 and user’s smart phone and so on(The RSSI and distance is just for users’ references). 4.4 Tap the S1 on App’s lists, users can see the dynamic chart about temperature and humidity,as image 3 Image 3 4.
humidity, as image 4 Image 4 5 Error range and parameters --Temperature Measuring Humidity Measuring Sampling period Item Range Value -40℃~70℃ Measure Accuracy 10℃~55℃ ≤10℃ or ≥55℃ 0.05℃ 0%RH~100%RH 0%RH~90%RH ≥90%RH 0.05%RH Once per second Resolution Range Measure Accuracy Resolution --- Error range It depends on battery working environment ±0.3℃ ±2℃ ----±2%RH ±3.5%RH ----- 6 How to search certain device on the App ‘BeaconSET’ and what are the interpretations. 6.
to be scanned in the red search frame,the App will filter automatically and the scan results will all be about the device names of the kind of device model that user have typed in.For example, if you type in the model name of S1,scan results will all be the device names of S1; Type in the device model to be scanned here,the App will filter automatically and the scan results will all be the device names of the kind of device model user have typed in.
references. 6.4 Power of broadcasting:please refer to image 7,the value of transmission power is shown in the red frame,the default value of transmission power:0dbm. Tx means broadcasting power,default value:0dbm Image 7 6.5 Temperature and humidity of broadcasting:please refer to image 8,current environment temperature and humidity is shown in the red frame,temperature unit:’℃’,humidity unit:’%’. The accuracy of temperature value under normal temperature is up to ±0.
6.6 Battery level of broadcasting:please refer to image 9,the battery level icon is beside the device name,there are four status for battery level:full battery level status,half battery level status,1/3 battery level status,and empty battery level status.Battery level was check per minute.
The content in the red frame is not compatible with S1 Image 10 6.8 Introduction of heading column Please refer to image 11,the brown area shows the heading column,and it is also the option of scanning.The App ‘BeaconSET’ keeps ranking the scanning result list in the first 10 seconds of initial scanning,and the device name whose signal strength is the strongest will be ranked at the top of scanning result lists.The red frames show the heading column which is applied to S1.
Image 11 Hope the methods above would actually help you scan and find the device you are looking for more faster. DECLARATION The contents of this handbook are for references and are subject to change without prior notice for further improvement. Minew team reserves all the rights for the final explanation. All Rights Reserved by Shenzhen Minew Technologoies Co., Ltd.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
